Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

I tried the suggestion you gave me but I'm still having a problem.

To make it simple this is what I did.

The AN1X is set to patch 002 the MIDI TX Ch is set to 1 the RX Ch is
also set to 1 and the Device number is also set to 1.

On the MPC2000 I have the MIDI set to 1A Sequence 1 Track 1

I entered F1 and inserted program change then set the number to 1

Recorded something and it played.



Step 2

Went to sequence 2 on the MPC2000 and laid down the drum track on
track 2, kept track 1 for the midi, set that to 2A, entered F1 and
inserted program change then set the number to 2.

Went to the AN1X and set the MIDI TX Ch to 2 and the RX Ch to 2 and
set the Device number to 2 and used patch 003.

Now this is where it gets tricky when I switch from sequence 2 to 1
the sound that plays is patch 003 instead of 002.

If there is any way that I can get this right please help me.


Went experimenting on my own here now.

MPC Seq 1 trk 1 midi 1a (prg 119 not the insert but from the main
screen)
AN1X MIDI TX Ch 1 RX Ch 1 Device 1

MPC Seq 2 trk 1 midi 2a prg 118 (same as above)
AN1X MIDI TX Ch 2 RX Ch 2 Device 2

When I did this the sounds changed but there was a delay in the
switch, what should I do here now to correct this?