Hi Dave,
>ok, heres the deal. the an1x transmits a bunch of data via MIDI out.
>after messing with the portamento and PEG/LFO knobs and other knobs
>too.. ive realized that the an1x can drastically change sounds from
>an external tone generator, unwanted for the most part, but i think
>these effects might be useful sometime. i cant figure out how to cut
>off all this MIDI data from being transmited, BUT i can filter the
>data from being recorded using the rm1x MIDI settings. although, i
>still hear unwanted effects (portamento especially) when im recording
>a track or improvisng. so basically i think there is no way i can
>stop the an1x from transmiting all this extra data via MIDI out, but
>i can filter it from being recorded into my sequencer. thanks for all
>the replies.
You can turn off most of them. Either AN1xEdit or the "Ctrl" section on pages 95 and 96 of the Owner's Manual will allow you to change the MIDI CC# of the Mod Wheel, foot pedals, ribbon controller, and the programmable knobs. You can even set some or all of the above to Off. You cannot, however, change the Portamento switch.
Regards,
-BW
--
Bruce Wahler
Design Consultant
Ashby Solutions™
http://consult.ashbysolutions.comCloneWheel Support Group and HiNote moderator
978.386.7389 voice/fax
bruce@...