ok, heres the deal. the an1x transmits a bunch of data via MIDI out.
after messing with the portamento and PEG/LFO knobs and other knobs
too.. ive realized that the an1x can drastically change sounds from
an external tone generator, unwanted for the most part, but i think
these effects might be useful sometime. i cant figure out how to cut
off all this MIDI data from being transmited, BUT i can filter the
data from being recorded using the rm1x MIDI settings. although, i
still hear unwanted effects (portamento especially) when im recording
a track or improvisng. so basically i think there is no way i can
stop the an1x from transmiting all this extra data via MIDI out, but
i can filter it from being recorded into my sequencer. thanks for all
the replies.
cheers
dave
--- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> AFAIK there is no method to disable the transmission of
> Channel Pressure from the AN1x. I downloaded a copy of the
> XL1 manual from E-mu and there does not appear to be a global
> disable for Channel Pressure - he'll likely have to disable
> Channel Pressure as a Modulation Source for the XL1 Patch in
> question. I could be mistaken so I'd advise checking in with the
> XL1 list here at Yahoo! Groups.
>
> Have you tried running the XL1 off the RM1x MIDI Thru? Does the
> RM1x allow filtering of Continuos Controllers? Most software
> sequencers and some multi-port MIDI Interfaces allow filtering of
> PB, AT, and CC's.
>
> Jon
>
> --- In AN1x-list@y..., "Bob Smith" <bob-smith@h...> wrote:
> > sounds like the aftertouch - you can teach your X11 to ignore it,
> or turn it off on the an1x
> > ----- Original Message -----
> > From: kollegekid12345
> > To: AN1x-list@y...
> > Sent: Sunday, October 13, 2002 8:12 PM
> > Subject: Re: [AN1x] FRUSTRATING! BAH.. can i get some help
> >
> >
> > the MOD wheel is all the way down.. im trying all the possible
> MIDI
> > setups... but the an1x is still giving off some type of signal
and
> > effecting the sounds in the xl1 =(
> >
> > is there a way to just kill the modulation effect i.e. remove
it
> from
> > the MIDI system?
> >
> > looks like imma have to drag that old casio piece of ∗∗∗∗ out
of
> the
> > closet and use that for a MIDI controller...
> >
> > --- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> > > Acutally, I think the AN1x data at the MIDI Out port is
> duplicated
> > on
> > > the MIDI Thru port. The easiest way to trouble shoot is to
> remove
> > > the RM1x from the MIDI chain. Simply go AN1x MIDI Out -->
> XL1
> > > MIDI In for trouble shooting.
> > >
> > > I suspect either 1) the MOD Wheel is not zeroed out, i.e.,
all
> the
> > > way down, and is modulating the LFO Speed or LFO Depth
> on
> > > the XL1 or 2) he's applying enough key pressure on the
> AN1x to
> > > trigger the aftertouch which is modulating some parameter
> on
> > > his XL1 (just as the MOD Wheel would.)
> > >
> > > Hope this helps.
> > >
> > > regards,
> > >
> > > Jon
> > >
> > > --- In AN1x-list@y..., "jez creek" <jez@j...> wrote:
> > > > If the out of the an1x is connected to the rm1x then it
> cannot be
> > > affecting
> > > > the xl1, it is most probable that the source of your
problem
> is
> > > the rm1x as
> > > > it's midi data is copied out of the an1x thru.
> > > > Jez Creek
> > > > http://www.shadowdancer.info
> > > >
> > > > -----Original Message-----
> > > > From: kollegekid12345 [mailto:kollegekid12345@y...]
> > > > Sent: 14 October 2002 00:11
> > > > To: AN1x-list@y...
> > > > Subject: [AN1x] FRUSTRATING! BAH.. can i get some help
> > > >
> > > >
> > > >
> > > > im using the an1x to trigger the sounds from a sound
> > > module... the
> > > > porblem is.. the an1x adds some type of modulation to
> > > external
> > > > sounds.. its some type of modulation (fine up and down
> picth
> > > changes)
> > > > that are annyoing as heck when putting together any type
> of
> > > melody. i
> > > > dont understand how the an1x is automatically effecting
> my
> > > sound
> > > > modules sounds.
> > > >
> > > > my MIDI set up is
> > > >
> > > > rm1x out > an1x in
> > > > an1x thru > xtreme lead (sound module) in
> > > > an1x out > rm1x in
> > > >
> > > > thanks
> > > > dave
> > > >
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@y...
> > Subscribe: AN1x-list-subscribe@y...
> > Unsubscribe: AN1x-list-unsubscribe@y...
> > List owner: AN1x-list-owner@y...
> >
> > Shortcut URL to this page:
> > http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]