AFAIK there is no method to disable the transmission of
Channel Pressure from the AN1x. I downloaded a copy of the
XL1 manual from E-mu and there does not appear to be a global
disable for Channel Pressure - he'll likely have to disable
Channel Pressure as a Modulation Source for the XL1 Patch in
question. I could be mistaken so I'd advise checking in with the
XL1 list here at Yahoo! Groups.
Have you tried running the XL1 off the RM1x MIDI Thru? Does the
RM1x allow filtering of Continuos Controllers? Most software
sequencers and some multi-port MIDI Interfaces allow filtering of
PB, AT, and CC's.
Jon
--- In AN1x-list@y..., "Bob Smith" <bob-smith@h...> wrote:
> sounds like the aftertouch - you can teach your X11 to ignore it,
or turn it off on the an1x
> ----- Original Message -----
> From: kollegekid12345
> To: AN1x-list@y...
> Sent: Sunday, October 13, 2002 8:12 PM
> Subject: Re: [AN1x] FRUSTRATING! BAH.. can i get some help
>
>
> the MOD wheel is all the way down.. im trying all the possible
MIDI
> setups... but the an1x is still giving off some type of signal and
> effecting the sounds in the xl1 =(
>
> is there a way to just kill the modulation effect i.e. remove it
from
> the MIDI system?
>
> looks like imma have to drag that old casio piece of ∗∗∗∗ out of
the
> closet and use that for a MIDI controller...
>
> --- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> > Acutally, I think the AN1x data at the MIDI Out port is
duplicated
> on
> > the MIDI Thru port. The easiest way to trouble shoot is to
remove
> > the RM1x from the MIDI chain. Simply go AN1x MIDI Out -->
XL1
> > MIDI In for trouble shooting.
> >
> > I suspect either 1) the MOD Wheel is not zeroed out, i.e., all
the
> > way down, and is modulating the LFO Speed or LFO Depth
on
> > the XL1 or 2) he's applying enough key pressure on the
AN1x to
> > trigger the aftertouch which is modulating some parameter
on
> > his XL1 (just as the MOD Wheel would.)
> >
> > Hope this helps.
> >
> > regards,
> >
> > Jon
> >
> > --- In AN1x-list@y..., "jez creek" <jez@j...> wrote:
> > > If the out of the an1x is connected to the rm1x then it
cannot be
> > affecting
> > > the xl1, it is most probable that the source of your problem
is
> > the rm1x as
> > > it's midi data is copied out of the an1x thru.
> > > Jez Creek
> > > http://www.shadowdancer.info
> > >
> > > -----Original Message-----
> > > From: kollegekid12345 [mailto:kollegekid12345@y...]
> > > Sent: 14 October 2002 00:11
> > > To: AN1x-list@y...
> > > Subject: [AN1x] FRUSTRATING! BAH.. can i get some help
> > >
> > >
> > >
> > > im using the an1x to trigger the sounds from a sound
> > module... the
> > > porblem is.. the an1x adds some type of modulation to
> > external
> > > sounds.. its some type of modulation (fine up and down
picth
> > changes)
> > > that are annyoing as heck when putting together any type
of
> > melody. i
> > > dont understand how the an1x is automatically effecting
my
> > sound
> > > modules sounds.
> > >
> > > my MIDI set up is
> > >
> > > rm1x out > an1x in
> > > an1x thru > xtreme lead (sound module) in
> > > an1x out > rm1x in
> > >
> > > thanks
> > > dave
> > >
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@y...
> Subscribe: AN1x-list-subscribe@y...
> Unsubscribe: AN1x-list-unsubscribe@y...
> List owner: AN1x-list-owner@y...
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]