the MOD wheel is all the way down.. im trying all the possible MIDI
setups... but the an1x is still giving off some type of signal and
effecting the sounds in the xl1 =(
is there a way to just kill the modulation effect i.e. remove it from
the MIDI system?
looks like imma have to drag that old casio piece of ∗∗∗∗ out of the
closet and use that for a MIDI controller...
--- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> Acutally, I think the AN1x data at the MIDI Out port is duplicated
on
> the MIDI Thru port. The easiest way to trouble shoot is to remove
> the RM1x from the MIDI chain. Simply go AN1x MIDI Out --> XL1
> MIDI In for trouble shooting.
>
> I suspect either 1) the MOD Wheel is not zeroed out, i.e., all the
> way down, and is modulating the LFO Speed or LFO Depth on
> the XL1 or 2) he's applying enough key pressure on the AN1x to
> trigger the aftertouch which is modulating some parameter on
> his XL1 (just as the MOD Wheel would.)
>
> Hope this helps.
>
> regards,
>
> Jon
>
> --- In AN1x-list@y..., "jez creek" <jez@j...> wrote:
> > If the out of the an1x is connected to the rm1x then it cannot be
> affecting
> > the xl1, it is most probable that the source of your problem is
> the rm1x as
> > it's midi data is copied out of the an1x thru.
> > Jez Creek
> > http://www.shadowdancer.info
> >
> > -----Original Message-----
> > From: kollegekid12345 [mailto:kollegekid12345@y...]
> > Sent: 14 October 2002 00:11
> > To: AN1x-list@y...
> > Subject: [AN1x] FRUSTRATING! BAH.. can i get some help
> >
> >
> >
> > im using the an1x to trigger the sounds from a sound
> module... the
> > porblem is.. the an1x adds some type of modulation to
> external
> > sounds.. its some type of modulation (fine up and down picth
> changes)
> > that are annyoing as heck when putting together any type of
> melody. i
> > dont understand how the an1x is automatically effecting my
> sound
> > modules sounds.
> >
> > my MIDI set up is
> >
> > rm1x out > an1x in
> > an1x thru > xtreme lead (sound module) in
> > an1x out > rm1x in
> >
> > thanks
> > dave
> >