nevermind... I got it to work.
--- In AN1x-list@y..., "kollegekid12345" <kollegekid12345@y...> wrote:
> hello,
>
> I'm gettin a "SysExAdr" ERROR on the AN1x after using certain
> features on the RM1X (like going from JOB mode into PATTERN mode).
> The AN1x manual says this error message occurs when the recieved
> system exclusive message address is incorrect and to confrim the
> address of the trasmitted data. I tried setting the device number
on
> the AN1X to every poosible setting, and I'm still getting an error
> message. When set at (1 through 16) I get an "DevNo. =NG" when set
at
> (off) I get "DevNo. =off" and when set at (all) I get "SysExAdr".
>
> My setup is basically:
> RM1X midi OUT >> EMU Xtreme Lead midi IN
> EMU Xtreme Lead Thru >> AN1X midi IN
> RM1X midi IN >> MIDI Keyboard midi OUT
>
> I have the AN1X set to Tx Ch 1 and Rx Ch 1
>
> Basically I'm trying to use the ANX1 strickly as a sound module
that
> I use MIDI channel 1 for...
>
> thanks for any help
> dave