> > Hmm very bizarre!- Could it have something to do with
> Yamaha's Middle C being
> > different to other manufacturer's middle C's?- How out of tune
> is the korg?
> > is it semitones of microtonal?- I know the AN can sometimes
> be a pig to tune
> > to other things. It may be that one of your controllers is set to
> output a
> > control while a receiving parameter on the Korg is assigned to
> that midi
> > input which is corresponding to pitch- try turning off all
> controller outs on
> > the AN and seeing what that does.
What makes this rather bizarre is that its not a pitch bend but a
semitone out on only certain keys. C and D are in tune over the whole
6 octaves while E,F,G A and B are not. All the black keys are in
tune. Its global as in it does not matter which voice I start up with
on the AN1x. I guess this rules out the controllers output otherwise
it would be over the whole keyboard, or would it? Can you please
advise how to turn off all controller outs and I will try this.
Further clue. With everything switched on and the Korg still out of
tune, I disconnect the midi in cable coming from the AN and hey
presto the Korg is back in tune. So this means it is definately a
signal from the AN that is causing the detune. Any ideas?
> This is a very good point. Double check you haven't inadvertantly
> assigned PB or a VCO1 or VCO2 Pitch adjustment to an Assign
> Knob, Pedal or Wheel that you hadn't intended too (see p. 9 of
> the Data List for Control Change numbers.)
Sorry, could you explain this in a bit more detail for me and what is
this Data List you mention?
> I would first check the Ctrl Device and Ctrl No. settings under
> UTILITY/SETUP - assuming the problem is global, i.e., it doesn't
> matter which Voice is active on the AN1x for the Korg to
> misbehave. If the problem occurs with only specific Voices then
> troubleshoot from the Ctrl Matrix settings.
Have checked the Ctrl Device and Ctrl No settings as described. There
are lots of them. What am I looking for?
Thanks
Alan