--- In AN1x-list@y..., terryfunken@a... wrote:
>
> In a message dated 29/5/02 12:34:41 pm, alan@s... writes:
>
> >Todays bizarre question. I have my AN1x as the master
keyboard which
> >controls my Korg N364. When I first boot everything up, my
Korg is
> >out of tune.
>
> Hmm very bizarre!- Could it have something to do with
Yamaha's Middle C being
> different to other manufacturer's middle C's?- How out of tune
is the korg?
> is it semitones of microtonal?- I know the AN can sometimes
be a pig to tune
> to other things. It may be that one of your controllers is set to
output a
> control while a receiving parameter on the Korg is assigned to
that midi
> input which is corresponding to pitch- try turning off all
controller outs on
> the AN and seeing what that does.
This is a very good point. Double check you haven't inadvertantly
assigned PB or a VCO1 or VCO2 Pitch adjustment to an Assign
Knob, Pedal or Wheel that you hadn't intended too (see p. 9 of
the Data List for Control Change numbers.)
I would first check the Ctrl Device and Ctrl No. settings under
UTILITY/SETUP - assuming the problem is global, i.e., it doesn't
matter which Voice is active on the AN1x for the Korg to
misbehave. If the problem occurs with only specific Voices then
troubleshoot from the Ctrl Matrix settings.
regards,
Jon