Unfortunetly I still cannot enable an effect by selecting the
environment buttons and faders. I still hear I pause in the audio
(like when switching programs) but no effect change. I checked the
AN1x and noticed that I was getting a midi buffer overrun error on
the AN1x (or something like that). I can however change the effect
in the AN1x and use the environment to change the parameters of the
effect, but I have to select the correct environment fader for that
effect. It's strange that I am getting the midi errors. Maybe it's
a unitor in fast mode or USB issue.
>
> 1.Double check the Port and Channel settings for your AN1x
> object, and it's sub-channels, in your Environment. Are they
> correct?
confirmed
> 2. If you select the Vari EF/EQ param on your AN1x under
> Voice/Common you can see the effect selection change when
> commands are issued from Logic.
at this stage I noticed the midi errors.
> 3. If all else fails - place a Monitor in between the output of the
> Vari layer and your An1x object to see what messages ARE
> getting through...
the effect program changes are not making it. What should the
monitor say if I'm sending an effect program change?
> I suggest you spend some time reading Ch. 5 of the Logic
> manual and download the FREE environment tutorials (PDFs)
> from Swiftkick.com so that you may become more familar with
> the environement and its workings.
I am in the process of doing this. Thanks.
best regards,
David