previous by date | index | next by date |
previous in topic | topic list |
--- In AN1x-list@y..., "Mike Bridge" <mike@b...> wrote:
> I'm new to the PLG-AN, and I can't seem to figure this problem
out.
>
> When I select a new voice in AN Expert Editor 1.0.1, I find
> that it doesn't initialize my plg-AN-150 fully. I'm in Voice mode
> on my CS6X and a AN-150 voice is selected from the synth.
The
> voice will play fine. Then, when I load another voice in the
Editor, it
> partially initializes the edit buffer with the new voice, but not
> completely.
I haven't used a CS6x + PLG150AN combo myself but here are
some tips & links that might point you in the right direction.
You can access the PLG150 Basics PDF from Yamaha in the
Files sections:
http://groups.yahoo.com/group/AN1x-list/files/Documentation/plg
150an.pdf
and Gary put together some basics/introductory tips which are
also in the files section (these are primarily focused on
configuration choices):
http://groups.yahoo.com/group/AN1x-list/files/Tips%20and%20Tr
icks/tt_plg150an_basics.htm
http://groups.yahoo.com/group/AN1x-list/files/Tips%20and%20Tr
icks/tt_plg150an_cakewlk9.htm
http://groups.yahoo.com/group/AN1x-list/files/Tips%20and%20Tr
icks/tt_plg150an_cubase5.htm
David Comdico started a dedicated CS6x list which can be found
here:
http://groups.yahoo.com/group/CS6X/ I know that he's using the
same combo and may be of help.
This subject has come up before so I'll refer you to the list
archives too - just do a search on CS6x or PLG150 and you'll get
plenty of results to review. For example, here's a thread from just
last week:
http://groups.yahoo.com/group/AN1x-list/message/5441
Hope this helps,
Jon