--- In AN1x-list@y..., "spaceanimals" <alciere@m...> wrote:
> Sometimes I can get a good distortion with no effects on, but
I'm not
> sure why. I can't do it every time-it seems more like luck of the
> draw.
Suggestions: 1) Use the Feedback parm in the VCA section for
distortion effects and/or 2) the Noise parameter in the MIX/VCF
section. If that's not noisy enough then 3) Crank up the FM Depth
parm in the Sync/FM section.
Also, sometimes I'm able to get the filter to self oscillate (I
> think) but again, I'm not sure why. On my old SIEL I just turned
down
> the filter cutoff and turned up the resonance-instant self
> 0scillation. Sometimes this works and sometimes it doesn't.
Remember, the FEG Depth setting interacts with the Filter Cutoff
value - make certain to adjust it when if you drastically reduce the
FC downwards.
Sometimes
> the amplitude feedback helps, sometimes it doesn't.Also, the
> amplitude feedback seems to have an optimum position
depending on the
> patch-it doesn't just get more raucous as you turn it up. It
reaches
> a sweet spot(or doesn't really do anything) then levels off.
Why?
Try raising the Filter Cutoff value in this instance.
regards,
Jon