--- In AN1x-list@y..., "Oeschey, Lars" <OESCHEY@M...> wrote:
> Hi,
>
> a few days ago, I programmed a new sound. I'm not very good
at this.
> Though the sound is somewhat usable, I somehow managed
that the ribbon
> controller doesn't work anymore in any preset. Even in presets
I didn't
> touch. Is there some way with AN1xEdit to change some global
parameter
> for the ribbon? How can I reset it? When I look at one of the
presets
> for example, that I usually use with ribbon-controller, and
where it
> doesn't work anymore, I have as "Ribbon Z" -"12 - Ribbon Z"
and as
> "Ribbon X" -> "13 - Ribbon X" assigned. I don't know if it's been
> different before, but it definitely ∗behaved∗ different before :(
>
> regars, Lars
Man that IS weird?!
The settings you describe, "12 - Ribbon Z" and "13 - Ribbon X'
are the default MIDI CC assignments as made using Ctrl Device
and Ctrl No. under UTITLITY/SETUP.
But the settings which affect the Scenes within a Voice are made
using the Ctrl Matrix under VOICE/SCENE SETUP. You must
have unintentionally changed the Param or Source value in the
Ctrl Matix. You should check that out 1st in the Voice you KNOW
the Ribbon Controller use to work. If that's not it, restore the
Voice from a back-up - if you don't have a back-up then 1) check
the Files section - everything should be current - or - 2) post back
to the list and maybe one of us have a copy.
regards,
Jon