>>
1. is there a bank for the editor which has all the stock plg sounds in
it?
<<
Yes, An1xEdit ships with some example banks; two of which are the Preset
defaults from the PLG150AN, the other is the factory presets from the
AN1x.
>>
2. is is possible to sysex the settings data down to the editor as i
choose each patch?
<<
There is not way to perform a bulk sysex request from the PLG150AN card
;-(
Regards
Gary Gregson
Email:
gary@...http://www.yme.co.uk/yme -----Original Message-----
From: R e i d | O d a [mailto:
brownboy@...]
Sent: 01 April 2002 23:22
To:
AN1x-list@yahoogroups.comSubject: RE: [AN1x] syncronizing editor w/ plg150-an
i really appreciate the reply. let me clarify my vague statement.
what i mean is, say i'm editing program #15 in the plg150. when i pull
up
the editor, all of the knobs and sliders are in the their default
position, not reflecting the settings of the plg150. as i change values
in the editor, only the settings i have changed are reflected in
the editor. when i save the sound and try to recall it later, it will
be
incomplete.
what i would like to know is:
1. is there a bank for the editor which has all the stock plg sounds in
it?
2. is is possible to sysex the settings data down to the editor as i
choose each patch?
-reid
On Mon, 1 Apr 2002, Gary Gregson wrote:
> Hi Reid,
>
> An1xEdit certainly saves all the parameters correctly to the library.
So
> its not clear what your problem actually is.
>
> Note if you expect An1xEdit to save the parameters into the PLG150AN
> preset memory, then this is impossible. The presets of the card are
> stored in read only memory (ROM) and thus cannot be changed. When you
> are editing them you are doing so in the cards edit buffer. However
this
> data is lost as soon as you select another voice/
>
> You can however download the voice stored in the An1xEdit library,
> either back to the edit buffer, or to one of the card User bank
memories
> (Note that user memories will be lost only when the card is powered
> off).
>
> Regards
>
> Gary Gregson
>
> Email:gary@...
> http://www.yme.co.uk/yme
>
>
> -----Original Message-----
> From: R e i d | O d a [mailto:brownboy@...]
> Sent: 29 March 2002 21:16
> To: AN1x-list@yahoogroups.com
> Subject: [AN1x] syncronizing editor w/ plg150-an
>
>
> i know that it's possible to syncronize the display in gary gregson's
> editor to the settings in the plg150. i'd like to edit the patches
> already in the synth, but when i make changes and save the patch in
the
> editor, it doesn't save all the parameters correctly.
>
> if there isn't a way to synchronize the two, what is the general
method
> for getting the two on the same page?
>
> thanks!
>
> -reid
>
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/