--- In AN1x-list@y..., christopher john stone <christone@o...>
wrote:
>
> I want to modify the settings of my AN1X's pitch bend wheel
> to enable me to pitchbend a sound over a much greater range
> than it will currently allow (which is only one note)
>
> The sound needs to start at a very low freq - perhaps 50-
> 100Hz? - at the bottom of the wheel's travel, and then be
> pitchbent to a mid-range, piano sort-of frequency at the
> centre wheel setting, then off up into the sonic stratosphere
> at the top of the travel
>
> I sense that it should be easy, but cannot seem to do it -
> either through the front panel or via AN1X Edit.
>
> Can anyone help?
>
> Thx, C
From the Ctlk Matrix, under VOICE/SCENE SETUP, use the Set
No parameter to choose Pitch Up and/or Ptich Down then use
the Depth paramter to set the desired Pitch Bend range. The
positive and negative amounts can be set independently - the
range can be adjusted +/- two octaves.
regards,
Jon