Hi Neil,
I purchased my AN1x around three years ago and within a month I was back at
the store complaining about the snap, crackle, and pops - only to be told it
was a known issue, and nothing could be done. (I've since learnt it's likely
a matter of an OS update - see archive, or Jon's advice).
One thing that seemed to be apparent is the crackles were related to patches
I'd recently been playing with. From a few tests, it appeared that if my
AN1x was switched off while still audible (such as the long sustain of a
string patch, or an ongoing arp or step sequence performance), the patch
became corrupted during power down.
No-one on the list has confirmed my observations, but by ensuring the synth
is silent before shutting down, I haven't haven't experienced a crackle
since.
Coincidence? Who knows, but worth a try.
Phil
From: "kibocheeks" <
kibocheeks@...>
Reply-To:
AN1x-list@yahoogroups.comDate: Sun, 3 Mar 2002 00:38:39 -0000
To: <
AN1x-list@yahoogroups.com>
Subject: Re: [AN1x] Re: Digital popping noise problem with AN1x
Many thanks, Jon.
I should have looked a bit harder!
Looks like I'm just unlucky. I'm going to keep an eye on it and hope it
doesn't get any worse.
Cheers,
Neil.
Community email addresses:
Post message:
AN1x-list@yahoogroups.com Subscribe:
AN1x-list-subscribe@yahoogroups.com Unsubscribe:
AN1x-list-unsubscribe@yahoogroups.com List owner:
AN1x-list-owner@yahoogroups.comShortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/