First Id check all conections.then reinstall the software and reload the
card. Perhaps even remove the card totally and reboot the synth. Then power
down and reinstall the card...............if that dont work you may have a
bigger problem.....ric
Keep in touch........is this in a CS6X?
----- Original Message -----
From: <AN1x-list@yahoogroups.com>
To: <AN1x-list@yahoogroups.com>
Sent: Tuesday, January 15, 2002 11:49 AM
Subject: [AN1x-list] Digest Number 642
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
> ------------------------------------------------------------------------
>
> There are 11 messages in this issue.
>
> Topics in this digest:
>
> 1. Re: Getting the new OS
> From: "jondl_2000" <jondl_2000@...>
> 2. Re: Re: Getting the new OS
> From: "Bastiaan van de Werk" <bazziman@...>
> 3. Re: Re: Getting the new OS
> From: "Peter Korsten" <peterk@...>
> 4. Emagic amt8 and An1x and An1xEdit
> From: "doctor_speed_2001" <doctor_speed_2001@...>
> 5. Re: Re: Getting the new OS
> From: "Peter Korsten" <peterk@...>
> 6. Re: Emagic amt8 and An1x and An1xEdit
> From: "Peter Korsten" <peterk@...>
> 7. Re: Emagic amt8 and An1x and An1xEdit
> From: "jondl_2000" <jondl_2000@...>
> 8. Re: Emagic amt8 and An1x and An1xEdit
> From: "doctor_speed_2001" <doctor_speed_2001@...>
> 9. Help!! I think my PLG150AN card is dead!!
> From: "glennfbartlett" <glennbartlett@...>
> 10. Re: Re: Getting the new OS
> From: "Bastiaan van de Werk" <bazziman@...>
> 11. RE: Emagic amt8 and An1x and An1xEdit
> From: "Gary Gregson" <gary@...>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 1
> Date: Mon, 14 Jan 2002 19:22:42 -0000
> From: "jondl_2000" <jondl_2000@...>
> Subject: Re: Getting the new OS
>
> --- In AN1x-list@y..., "Andrea TONI" <Andrea.Toni@e...> wrote:
> >
> > Hello,
> >
> > 1st tnx for the tips on ex5s
> > I know scsi is terrible but the arps (50 users) and the pattern
> > seq for each key not to mention the nice efxs and original
> > quality of the samples really make the ex5 appealing to me
> >
> > about Yamaha NL .. mmm mmm
> > I called them 2 times for AN1x and EX5 updates
> > very unfriendly and confused people
> > basically they told me to ask to a shop dealer
> > for the upgrades cos they have a special
> > catalog (expensive price list I guess he meant!)
> >
> > I know a friendly shop in Noordwik .. I will try there ...
> > in the past he gave me many free OS updates .. but for Roland
> gears
> > lets hope and I will let u know ..
> >
> > is outrageous that we have to pay for bug fixes !
> >
>
> How do you ∗know∗ you have to pay for the EPROM when you
> haven't even spoken to the dealer yet? You're jumping the gun,
> IMO. Let us know how it turns out. Has anybody else spoken with
> Yamaha NL?
>
> Here in the US Yamaha provided me the EPROM free of charge
> (and out of warranty too.) I expected to pay for shipping and
> handling but there was no charge for that either.
>
>
> regards,
>
> Jon
>
> > Regards
> > -------------------------------------ENV1-----ENV2---ENV3--------------
> > Andrea TONI VCO1 \ | |
> > Science Operation and Data
> VCO2-->--VCF--->VCA---->DUCATI 996
> > Systems Division (SCI-SD) VCO3 / | |
> > -------------------------------------LFO1-----LFO2---LFO3--------------
> > email: Andrea.Toni@e... http://ssd.esa.int
> http://www.estec.esa.int
> >
> > ----- Original Message -----
> > From: "jondl_2000" <jondl_2000@y...>
> > To: <AN1x-list@y...>
> > Sent: Saturday, January 12, 2002 18:46 PM
> > Subject: [AN1x-list] Re: Getting the new OS
> >
> >
> > > --- In AN1x-list@y..., "Bastiaan van de Werk" <bazziman@h...>
> > > wrote:
> > > > Well I tried several times and the few times I got an answer
> > > they told me to contact Yamaha in the Netherlands but these
> > > morrons never answered any of my mails.
> > >
> > >
> > > I found the Yamaha Netherlands web site from here:
> > >
> > > http://www.yamahasynth.com/link/index.html
> > >
> > > and found the following contact info:
> > >
> > > "If you want to get in contact to your local dutch
> subsidiary,please
> > > find here the address:"
> > >
> > >
> > > Yamaha Music Nederland
> > > Clarissenhof 5b
> > > 4133 AB Vianen
> > > Tel.: +31(0)347 358040
> > > Fax: +31(0)347 358060
> > >
> > > Have you tried them at this number and spoken to a real
> person
> > > or have you only had email disappear into the abyss?
> > >
> > > Jon
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 2
> Date: Mon, 14 Jan 2002 21:53:42 +0100
> From: "Bastiaan van de Werk" <bazziman@...>
> Subject: Re: Re: Getting the new OS
>
> Well, acoording to dutch consumer law the show is responsible for
upgrades, bugfixes etc...so it does make a little sense that they tell you
to get your stuff there....aargh....frustrating since I bought my synth all
the way in A'dam..
>
> Bastiaan van de Werk
>
> http://www.geocities.com/basvandewerk/
> ----- Original Message -----
> From: jondl_2000
> To: AN1x-list@yahoogroups.com
> Sent: Monday, January 14, 2002 8:22 PM
> Subject: [AN1x-list] Re: Getting the new OS
>
>
> --- In AN1x-list@y..., "Andrea TONI" <Andrea.Toni@e...> wrote:
> >
> > Hello,
> >
> > 1st tnx for the tips on ex5s
> > I know scsi is terrible but the arps (50 users) and the pattern
> > seq for each key not to mention the nice efxs and original
> > quality of the samples really make the ex5 appealing to me
> >
> > about Yamaha NL .. mmm mmm
> > I called them 2 times for AN1x and EX5 updates
> > very unfriendly and confused people
> > basically they told me to ask to a shop dealer
> > for the upgrades cos they have a special
> > catalog (expensive price list I guess he meant!)
> >
> > I know a friendly shop in Noordwik .. I will try there ...
> > in the past he gave me many free OS updates .. but for Roland
> gears
> > lets hope and I will let u know ..
> >
> > is outrageous that we have to pay for bug fixes !
> >
>
> How do you ∗know∗ you have to pay for the EPROM when you
> haven't even spoken to the dealer yet? You're jumping the gun,
> IMO. Let us know how it turns out. Has anybody else spoken with
> Yamaha NL?
>
> Here in the US Yamaha provided me the EPROM free of charge
> (and out of warranty too.) I expected to pay for shipping and
> handling but there was no charge for that either.
>
>
> regards,
>
> Jon
>
> > Regards
>
> -------------------------------------ENV1-----ENV2---ENV3--------------
> > Andrea TONI VCO1 \ | |
> > Science Operation and Data
> VCO2-->--VCF--->VCA---->DUCATI 996
> > Systems Division (SCI-SD) VCO3 / | |
>
> -------------------------------------LFO1-----LFO2---LFO3--------------
> > email: Andrea.Toni@e... http://ssd.esa.int
> http://www.estec.esa.int
> >
> > ----- Original Message -----
> > From: "jondl_2000" <jondl_2000@y...>
> > To: <AN1x-list@y...>
> > Sent: Saturday, January 12, 2002 18:46 PM
> > Subject: [AN1x-list] Re: Getting the new OS
> >
> >
> > > --- In AN1x-list@y..., "Bastiaan van de Werk" <bazziman@h...>
> > > wrote:
> > > > Well I tried several times and the few times I got an answer
> > > they told me to contact Yamaha in the Netherlands but these
> > > morrons never answered any of my mails.
> > >
> > >
> > > I found the Yamaha Netherlands web site from here:
> > >
> > > http://www.yamahasynth.com/link/index.html
> > >
> > > and found the following contact info:
> > >
> > > "If you want to get in contact to your local dutch
> subsidiary,please
> > > find here the address:"
> > >
> > >
> > > Yamaha Music Nederland
> > > Clarissenhof 5b
> > > 4133 AB Vianen
> > > Tel.: +31(0)347 358040
> > > Fax: +31(0)347 358060
> > >
> > > Have you tried them at this number and spoken to a real
> person
> > > or have you only had email disappear into the abyss?
> > >
> > > Jon
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 3
> Date: Mon, 14 Jan 2002 18:14:05 +0100
> From: "Peter Korsten" <peterk@...>
> Subject: Re: Re: Getting the new OS
>
> From: "Andrea TONI" <Andrea.Toni@...>
>
> > about Yamaha NL .. mmm mmm
> > I called them 2 times for AN1x and EX5 updates
> > very unfriendly and confused people
> > basically they told me to ask to a shop dealer
> > for the upgrades cos they have a special
> > catalog (expensive price list I guess he meant!)
>
> Yamaha Netherlands is little more than a sales organisation. They also
offer
> training to dealers.
>
> That's the corporate policy of Yamaha, or perhaps Yamaha Europe. There's
not
> much you can do about it.
>
> - Peter
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 4
> Date: Mon, 14 Jan 2002 21:27:47 -0000
> From: "doctor_speed_2001" <doctor_speed_2001@...>
> Subject: Emagic amt8 and An1x and An1xEdit
>
>
> Is anyone using there An1x with an Emagic AMT8?
>
> I'm having a problem with the editor software broadcasting the edit
> information on all the midi devices. It is odd, when I change a
> control on the An1xEdit software, it changes the setting of the amt8.
> I can watch the midi activity lights and all the outputs light up
> when I changes the cutoff (in the editor) for example.
>
> Thanks,
> Steve
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 5
> Date: Mon, 14 Jan 2002 22:08:29 +0100
> From: "Peter Korsten" <peterk@...>
> Subject: Re: Re: Getting the new OS
>
> From: "Bastiaan van de Werk" <bazziman@...>
>
> > Well, acoording to dutch consumer law the show is responsible for
> upgrades, bugfixes etc...so it does make a little sense that they tell you
> to get your stuff there....aargh....frustrating since I bought my synth
all
> the way in A'dam..
>
> Any Yamaha dealer will help you. They're not being difficult about that.
> It's just that the national organisation won't help you directly, because
> they're not equipped for it.
>
> My personal experience with Yamaha Netherlands is very positive. Guess
where
> I got my copy of the technical reference manual of the EX5 from?
>
> - Peter
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 6
> Date: Mon, 14 Jan 2002 22:36:36 +0100
> From: "Peter Korsten" <peterk@...>
> Subject: Re: Emagic amt8 and An1x and An1xEdit
>
> From: "doctor_speed_2001" <doctor_speed_2001@...>
>
> > Is anyone using there An1x with an Emagic AMT8?
>
> No, but...
>
> > I'm having a problem with the editor software broadcasting the edit
> > information on all the midi devices. It is odd, when I change a
> > control on the An1xEdit software, it changes the setting of the amt8.
> > I can watch the midi activity lights and all the outputs light up
> > when I changes the cutoff (in the editor) for example.
>
> It looks like the AMT8 is listening to certain specific MIDI information
it
> shouldn't do. Is there perhaps a setting in the AMT8 that you can switch
> off, so it only listens to its own ID?
>
> I forgot the exact phrasing, perhaps the rest could help us out here.
>
> - Peter
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 7
> Date: Tue, 15 Jan 2002 01:06:45 -0000
> From: "jondl_2000" <jondl_2000@...>
> Subject: Re: Emagic amt8 and An1x and An1xEdit
>
> --- In AN1x-list@y..., "doctor_speed_2001"
> <doctor_speed_2001@y...> wrote:
> >
> > Is anyone using there An1x with an Emagic AMT8?
>
> Are you using Win or Mac?
>
>
> >
> > I'm having a problem with the editor software broadcasting the
> edit
> > information on all the midi devices. It is odd, when I change a
> > control on the An1xEdit software, it changes the setting of the
> amt8.
>
> How exactly? What settings on the AMT8 are affected?
>
> > I can watch the midi activity lights and all the outputs light up
> > when I changes the cutoff (in the editor) for example.
> >
>
> I assume you mean on ports other than the pair connecting the
> AN1x to the AMT8, right?
>
> > Thanks,
> > Steve
>
> Jon
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 8
> Date: Tue, 15 Jan 2002 04:20:58 -0000
> From: "doctor_speed_2001" <doctor_speed_2001@...>
> Subject: Re: Emagic amt8 and An1x and An1xEdit
>
> --- In AN1x-list@y..., "jondl_2000" <jondl_2000@y...> wrote:
> > --- In AN1x-list@y..., "doctor_speed_2001"
> > <doctor_speed_2001@y...> wrote:
> > >
> > > Is anyone using there An1x with an Emagic AMT8?
> >
> > Are you using Win or Mac?
> >
> >
> > >
> > > I'm having a problem with the editor software broadcasting the
> > edit
> > > information on all the midi devices. It is odd, when I change a
> > > control on the An1xEdit software, it changes the setting of the
> > amt8.
> >
> > How exactly? What settings on the AMT8 are affected?
> >
> > > I can watch the midi activity lights and all the outputs light up
> > > when I changes the cutoff (in the editor) for example.
> > >
> >
> > I assume you mean on ports other than the pair connecting the
> > AN1x to the AMT8, right?
> >
> > > Thanks,
> > > Steve
> >
> > Jon
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 9
> Date: Tue, 15 Jan 2002 06:49:19 -0000
> From: "glennfbartlett" <glennbartlett@...>
> Subject: Help!! I think my PLG150AN card is dead!!
>
> Can anyone help me with this problem?
>
> My PLG150AN card has mysteriously stopped working and I cant
> get it going. I have no explanation why, it just stopped in the
> middle of a studio session with no alteration to my system which
> up to now has been faultless for about 18 months.
>
> My setup: Mac G4 450
> SW1000XG
> PLG150AN card
> OMS 2.3.8 (latest)
> XGedit Mac (for SW1000XG)
> AN1Xedit 1.1 Mac (for PLG150)
> Logic 4.7.1
>
> I have tried all the following: Reboot, Check all OMS settings and
> reset everything, Reinstall card in PCI slot and clean everything,
> turn off overnight and let cool down, all to no avail.
>
> Now here's the scary part: When I do a "test" on OMS I usually
> hear the AN card sounding together with the SW1000XG but I
> cant get this anymore, only hear the SW1K (ie the PLG card is
> not receiving midi or is dead), also when I launch AN1X edit I
> cant get any sound when I play the virtual keyboard.
> To me this means that either midi is not adressing the card (but
> then AN1Xedit should still work) or that the card has been
> trashed.
>
> Anyone here had this problem?
> Do I need to see a Service person and have the card checked?
> (Where I live Yamaha service is only up to repairing broken
> Piano stools!)
>
> TIA
> Glenn Bartlett
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 10
> Date: Tue, 15 Jan 2002 12:08:07 +0100
> From: "Bastiaan van de Werk" <bazziman@...>
> Subject: Re: Re: Getting the new OS
>
> Ok, I'll give it one more try...thanks
>
> Bastiaan van de Werk
>
> http://www.geocities.com/basvandewerk/
> ----- Original Message -----
> From: Peter Korsten
> To: AN1x-list@yahoogroups.com
> Sent: Monday, January 14, 2002 10:08 PM
> Subject: Re: [AN1x-list] Re: Getting the new OS
>
>
> From: "Bastiaan van de Werk" <bazziman@...>
>
> > Well, acoording to dutch consumer law the show is responsible for
> upgrades, bugfixes etc...so it does make a little sense that they tell
you
> to get your stuff there....aargh....frustrating since I bought my synth
all
> the way in A'dam..
>
> Any Yamaha dealer will help you. They're not being difficult about that.
> It's just that the national organisation won't help you directly,
because
> they're not equipped for it.
>
> My personal experience with Yamaha Netherlands is very positive. Guess
where
> I got my copy of the technical reference manual of the EX5 from?
>
> - Peter
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 11
> Date: Tue, 15 Jan 2002 11:32:06 -0000
> From: "Gary Gregson" <gary@...>
> Subject: RE: Emagic amt8 and An1x and An1xEdit
>
> Hi Steve,
>
> >>
> It is odd, when I change a
> control on the An1xEdit software, it changes the setting of the amt8.
> <<
>
> Can you be more specific? Are you saying it actually changes parameters
> within the amt8 device, and if so which? Or are you simply saying that
> the amt8 broadcasts the incoming data to all MIDI ports?
>
> If it's the latter, then it may be by design. The AN1xEdit data is sent
> as channel independent System Exclusive data. It may be that the amt8 is
> designed to broadcast sysex on all ports (or there is some switch in the
> unit that provides this mode). It seems a strange thing to do, but
> should cause any problems (beyond needlessly consuming bandwidth!)
>
> Regards
>
> Gary Gregson
>
> Email:gary@...
> http://www.yme.co.uk/yme
>
>
> -----Original Message-----
> From: doctor_speed_2001 [mailto:doctor_speed_2001@...]
> Sent: 14 January 2002 21:28
> To: AN1x-list@yahoogroups.com
> Subject: [AN1x-list] Emagic amt8 and An1x and An1xEdit
>
>
> Is anyone using there An1x with an Emagic AMT8?
>
> I'm having a problem with the editor software broadcasting the edit
> information on all the midi devices. It is odd, when I change a
> control on the An1xEdit software, it changes the setting of the amt8.
> I can watch the midi activity lights and all the outputs light up
> when I changes the cutoff (in the editor) for example.
>
> Thanks,
> Steve
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>