--- In AN1x-list@y..., "doctor_speed_2001"
<doctor_speed_2001@y...> wrote:
> --- In AN1x-list@y..., "Gary Gregson" <gary@y...> wrote:
> >> It is odd, when I change a
> >> control on the An1xEdit software, it changes the
> >>setting of the amt8.
> > Can you be more specific? Are you saying it actually
> > changes parameters within the amt8 device, and if
> >so which? Or are you simply saying that
> > the amt8 broadcasts the incoming data to all MIDI ports?
> > ....
>
> I think it is actually changing parameters on
> the amt8. The amt8 has patches itself and when I
> use a control and An1xEdit, the patch on the amt8
> is somehow changed. I'm not sure what parameters
> in the amt8 are being changed. If I turn on the midi
> activity window (which prints out the midi activity)
> it quits working also.
>
>
From your description it sounds like your AMT8 is receiving a
program change command and as a result is inc/dec through it's
internal patches. Does this happen ONLY when performing an
edit from within AN1xEdit or are you using a second hardware
controller by chance? Perhaps a MIDI loop is occuring - I had a
MIDI loop result in all kinds of havoc in my MIDI set-up recently.
At present I use an Opcode Studio 128x (similar to an AMT8) and
I typically leave program one on the 128x set to a null
configuration for use with my sequencing environment and other
MIDI apps. Is your AMT8 by chance defaulting to a program with
some custom MIDI mapping for stand alone use? I use a few
programs on the 128x to route the AN1x (my controller keyboard)
to other hardware devices for stand alone use, i.e., no computer
turned on. Perhaps you do the same with the AMT8?
Just some ideas....I think you should check out the Sound Diver
list as Gary suggested. That's probably your best shot :-)
Jon