i figured out what my problem was. i got my pwm depth amd my p mod
depth confused in the control matrix. all is cool and what i am trying
to do works well. an1x edit is flawless!! is work perfectly!!!
try out what i thought i had a problem with below it's wicked for d&b.
assign your vco2 pwm depth to a pich bend wheel in the matrix.
make shure your vco 2 is a sine or triangle wave and that it's pwm
depth source is "fixed" set your vco 1 to a square wave.
while playing mess around with the pitchbend wheel but don't forget to
set the values of the pitchbend to +0 & -0. sounds cool don't it!!
elektro dan.
--- In AN1x-list@y..., "ELEKTRO DAN" <elektro_dan@y...> wrote:
> hi,
>
> i'm having a problem with the vco2 "pmod depth" on my plg150an using
> an1x edit.
>
> when i set vco 2 to sine and assign the "pmod depth" to
> be modulated by the free eg or my pitchbend wheel it is always being
> modulated by "lfo 1" even when the "pwm depth source" is "fixed".
> moving the pitchbend wheel to a higher value only increases the
value
> that the vco 2 "pmod depth" is being effected by "lfo1".
>
> how can i fix this so i can control the depth of vco 2's "pmod
depth"
> using the free eg or a picthbend wheel without it being effected by
> "lfo 1" ? keep in mind that i already set the "pwm depth source" to
> "fixed".
>
> thanks,
>
> elektro dan.