Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list  

Subject: Re: [AN1x-list] Re: an1x construction. (Wall Warts of all sorts)

From: Bruce Wahler <bruce@...>
Date: 2001-10-03

Ed,

The YA-3/PA-3 is the older model, rated at (I believe) 10V and 700mA. (I
have a replacement supply by Mutec that claims to be the "same
specifications as the Yamaha PA-3," and that's what it is rated at.)

The replacement PA-3B, which came with my AN1x, is rated at 12V and
700mA. I have both, and both SEEM to work with the AN1x, as do laptop
switcher supplies of 11V @ 1.9A and 12V @ 1.25A that I have lying around.

I suspect that the whole insides of the AN1x are powered by 5VDC, and so
any supply of 8V or greater should work. I could be mistaken, though.

Regards,

-BW

--
Bruce Wahler
Design Consultant
Ashby Solutions™
www.ashbysolutions.com
CloneWheel Support Group moderator
978.386.7389 voice
978.964.0547 fax
bruce@...

At 06:12 P 10/2/2001 -0400, you wrote:
>PA-3B!!!! Yamaha sent me a YA-3. (???)
>
>Jon, could you please tell me what ratings are printed on the outside of the
>PA-3B?
>
>
>Ed Edwards
>Leader: Ezekiel's Wheel® »»»»Retro-Progressive Rock««««
><http://www.untiedmusic.com/ezekiel>http://www.untiedmusic.com/ezekiel
>http://artists.mp3s.com/artists/227/ezekiels_wheel.html
>°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
>°·.·°·.·°·.·°·.·°
>