Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@y..., "Ed Edwards" <edward.edwards@v...> wrote:
if
> your wall wart goes dead, always replace it with one that can
supply enough
> current. 10 volts at 500 mA didn't work.
> °·.·°·.·°·.·°·.·°

Well, let me ask a useful question: Too much electricity can kill
your equipment, can not enough electricity kill your equipment too?
Did your AN1x still worked after replacing the wall wart?

--Tom