--- In AN1x-list@y..., "Timo Sandholm" <timo.sandholm@u...> wrote:
> Hi Jon,
>
> Thanks for the answer... though I'm new with logic so the error
might be
> there too. Currently I'm reading users manual and beginners guide
to the
> environment just to understand whole concept behind the program :-/
...
> it's not the easiest one to get up and running... but I'll try your
> suggestions and let's see what happens.
Try this (after importing the PLG150AN Env):
In the Environment, go to the layer 'Clicks & Ports'
Locate the object 'PLG-AN150'; Click on the icon of the MIDI port
immediately above the 4x4 grid of the multi-instrument; On the left
hand side of your screen you should see the parameter box for the
instrument object; Click on the space adjacent to where it says Port
and choose the port your AN200 MIDI in/out connection is attached;
Then, where it says Cha select ALL.
Now, back to the PLG-AN150 object - the 4x4 grid represents the 16
available MIDI channels in a multi-instrument (that's Emagic-speak
for multitimbral device). Click on the numbered grid box, '1' for
example, that you have set up your AN200 to receive on; Double
check the parameter box setting for Channel 1 are correct, i.e., Port
should equal the physical port and Cha should equal '1'. You should
now be able to toggle to the Arrange page in Logic and set a track
to play your AN200 on Cha 1. If this is working then you can go to
the
Environment layer 'PLG150AN' and the SysEx commands should be
received correctly by the AN200. I tested is again with my AN1x and
it works fine - occasionally the AN1x will complain of a SysEx
receive error :-( but that's no big deal.
It's important to remember that this is a one way connection, i.e.,
Logic will not know the parameter values of the active Voice in your
AN200. When you move a slider in this environment you are sending
a SysEx string with parameter values that will overwrite the active
Voice so, while it similar to a parameter offset, it's really not.
Make
sense? For all intents is the same thing...
>
> AN200 should match to AN1x sysex vice, though some parameters are
different.
> AN200 online manual you can find here http://www.yamaha.co.uk and
then click
> on manual library...
I downloaded the manual and gave it a ∗quick∗ once over. It looks
like the LSB/MSB Device Number Code are NOT the same for the
AN200 ( 02H 05H ) as the AN1x ( 1A 02 ). This is not my strong suite
but
I suspect this could be a problem?!
>
> Cheers,
> TimoS
Good luck,
Jon