'sides this getting way technical.........hows about informing us.......even
the new.........about the subject and the concerns so we may
learn.........we may even be able to help you by researching the topic on
the net...........something I for one am particularly good at........
much better than my spelling or diction anyway...lol. Till zen, ric-----
Original Message -----
From: <
AN1x-list@yahoogroups.com>
To: <
AN1x-list@yahoogroups.com>
Sent: Friday, July 13, 2001 4:38 AM
Subject: [AN1x-list] Digest Number 474
Community email addresses:
Post message:
AN1x-list@yahoogroups.com Subscribe:
AN1x-list-subscribe@yahoogroups.com Unsubscribe:
AN1x-list-unsubscribe@yahoogroups.com List owner:
AN1x-list-owner@yahoogroups.comShortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list------------------------------------------------------------------------
There are 6 messages in this issue.
Topics in this digest:
1. Re: Re: outputs
From: "Jake B" <
drummer@...>
2. Re: Re: outputs
From: "Ed Edwards" <
edward.edwards@...>
3. Re: outputs
From:
jondl_2000@... 4. Re: Digest Number 471
From: "Rich Allen" <
skyclad@...>
5. new win2k driver?
From:
DMANX@... 6. Re: new win2k driver?
From:
jondl_2000@...________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Thu, 12 Jul 2001 07:52:52 -0400
From: "Jake B" <
drummer@...>
Subject: Re: Re: outputs
It is being run into a rolls 10 channel stereo line mixer. Which then runs
into a 16 channel peavy mixer.
should be ok
Jake
----- Original Message -----
From: "Ed Edwards" <edward.edwards@...>
To: <AN1x-list@yahoogroups.com>
Sent: Wednesday, July 11, 2001 11:29 PM
Subject: Re: [AN1x-list] Re: outputs
> Sometimes the doctor has to ask personal questions that may embarrass you
> like, "How far was your nose in the young ladies room before she slammed
the
> door on it?" In your case we'd have to ask, "What are/were you running
your
> outputs into? The output circuitry is looking for a standard line level
> load such as a mixer, keyboard amp or similar input, and without the
proper
> load for the An1x final amps all sorts of bad things may happen in the
> signal chain.
>
> Ed Edwards
> Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
> http://www.untiedmusic.com/ezekiel
> http://artists.mp3s.com/artists/227/ezekiels_wheel.html
> °·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
> °·.·°·.·°·.·°·.·°
> ----- Original Message -----
> From: "Jake B" <drummer@...>
> To: <AN1x-list@yahoogroups.com>
> Sent: Wednesday, July 11, 2001 11:15 PM
> Subject: Re: [AN1x-list] Re: outputs
>
>
> > nope...no clicking or poping at all. Just very little output. Do you
> have
> > a number to customer service? Also do you think it would be bad to use
> the
> > headphone output for now? Becasue I use this synth live and have gigs
> > coming up. Also could it be some how one of my other pieces of gear
that
> > casued the problem. I have a rolls rack mixer and a korg mono poly
> running
> > through it too. With an older yamaha mixer I had the mono poly would
cut
> > the output on the rest of the synths to almost nothing. I think it was
> just
> > the mixer tho.
> >
> > TIA,
> > Jake
> >
> > ----- Original Message -----
> > From: <jondl_2000@...>
> > To: <AN1x-list@yahoogroups.com>
> > Sent: Wednesday, July 11, 2001 9:16 PM
> > Subject: [AN1x-list] Re: outputs
> >
> >
> > > --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
> > > > The outputs on my An1x have hardly any output. It seems like they
put
> > out some sound and then fade off really quick. The headphone output
works
> > fine but the main left and right is very low. Any ideas what could
casue
> > this? It was working fine and then nothing.
> > > >
> > > > TIA,
> > > > Jake
> > > >
> > > >
> > >
> > > Yikes!
> > >
> > > Jake, I've not heard of that problem with an AN1x. Has anybody else on
> > > the list?
> > >
> > > Did your AN1x ever exhibit the infamous 'popping and clicking' sound
at
> > > start-up? If so, did you (or a previous owner?) ever have the repair
> > > affected by Yamaha? I ask these questions only to see if there's any
> > > relation between the old problem (the audible crackling) and the
> > > problem you've descibed (audio drop-off.)
> > >
> > > I'd hazard a guess this is a service issue and encourage you to
contact
> > > Yamaha Customer Assistance or a local Service Center. Prefably one
that
> > > you TRUST!. FWIW - I had the hardware repair for the 'old' problem
> > > completed some time ago and have never had a reoccurence.
> > >
> > >
> > > HTH,
> > >
> > > Jon
> > >
> > >
> > >
> > > Community email addresses:
> > > Post message: AN1x-list@yahoogroups.com
> > > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > > List owner: AN1x-list-owner@yahoogroups.com
> > >
> > > Shortcut URL to this page:
> > > http://groups.yahoo.com/group/AN1x-list
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@yahoogroups.com
> > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > List owner: AN1x-list-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> > http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Thu, 12 Jul 2001 08:38:59 -0400
From: "Ed Edwards" <edward.edwards@...>
Subject: Re: Re: outputs
On first thought, it sounds like it has to go on the bench... but wait. I
had some TERRIBLE problems with mine after loading up some patches, so I
re-initialized it to the factory settings and it fixed everything. The
re-init procedure is in the back of the manual somewhere. hope this works
for you
Ed Edwards
Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
http://www.untiedmusic.com/ezekiel
http://artists.mp3s.com/artists/227/ezekiels_wheel.html
°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
°·.·°·.·°·.·°·.·°
----- Original Message -----
From: "Jake B" <drummer@...>
To: <AN1x-list@yahoogroups.com>
Sent: Thursday, July 12, 2001 7:52 AM
Subject: Re: [AN1x-list] Re: outputs
> It is being run into a rolls 10 channel stereo line mixer. Which then
runs
> into a 16 channel peavy mixer.
> should be ok
>
> Jake
> ----- Original Message -----
> From: "Ed Edwards" <edward.edwards@...>
> To: <AN1x-list@yahoogroups.com>
> Sent: Wednesday, July 11, 2001 11:29 PM
> Subject: Re: [AN1x-list] Re: outputs
>
>
> > Sometimes the doctor has to ask personal questions that may embarrass
you
> > like, "How far was your nose in the young ladies room before she slammed
> the
> > door on it?" In your case we'd have to ask, "What are/were you running
> your
> > outputs into? The output circuitry is looking for a standard line level
> > load such as a mixer, keyboard amp or similar input, and without the
> proper
> > load for the An1x final amps all sorts of bad things may happen in the
> > signal chain.
> >
> > Ed Edwards
> > Leader: Ezekiel's Wheel »»»»Retro-Progressive Rock««««
> > http://www.untiedmusic.com/ezekiel
> > http://artists.mp3s.com/artists/227/ezekiels_wheel.html
> > °·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°·.·°
> > °·.·°·.·°·.·°·.·°
> > ----- Original Message -----
> > From: "Jake B" <drummer@...>
> > To: <AN1x-list@yahoogroups.com>
> > Sent: Wednesday, July 11, 2001 11:15 PM
> > Subject: Re: [AN1x-list] Re: outputs
> >
> >
> > > nope...no clicking or poping at all. Just very little output. Do you
> > have
> > > a number to customer service? Also do you think it would be bad to
use
> > the
> > > headphone output for now? Becasue I use this synth live and have gigs
> > > coming up. Also could it be some how one of my other pieces of gear
> that
> > > casued the problem. I have a rolls rack mixer and a korg mono poly
> > running
> > > through it too. With an older yamaha mixer I had the mono poly would
> cut
> > > the output on the rest of the synths to almost nothing. I think it
was
> > just
> > > the mixer tho.
> > >
> > > TIA,
> > > Jake
> > >
> > > ----- Original Message -----
> > > From: <jondl_2000@...>
> > > To: <AN1x-list@yahoogroups.com>
> > > Sent: Wednesday, July 11, 2001 9:16 PM
> > > Subject: [AN1x-list] Re: outputs
> > >
> > >
> > > > --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
> > > > > The outputs on my An1x have hardly any output. It seems like they
> put
> > > out some sound and then fade off really quick. The headphone output
> works
> > > fine but the main left and right is very low. Any ideas what could
> casue
> > > this? It was working fine and then nothing.
> > > > >
> > > > > TIA,
> > > > > Jake
> > > > >
> > > > >
> > > >
> > > > Yikes!
> > > >
> > > > Jake, I've not heard of that problem with an AN1x. Has anybody else
on
> > > > the list?
> > > >
> > > > Did your AN1x ever exhibit the infamous 'popping and clicking' sound
> at
> > > > start-up? If so, did you (or a previous owner?) ever have the repair
> > > > affected by Yamaha? I ask these questions only to see if there's any
> > > > relation between the old problem (the audible crackling) and the
> > > > problem you've descibed (audio drop-off.)
> > > >
> > > > I'd hazard a guess this is a service issue and encourage you to
> contact
> > > > Yamaha Customer Assistance or a local Service Center. Prefably one
> that
> > > > you TRUST!. FWIW - I had the hardware repair for the 'old' problem
> > > > completed some time ago and have never had a reoccurence.
> > > >
> > > >
> > > > HTH,
> > > >
> > > > Jon
> > > >
> > > >
> > > >
> > > > Community email addresses:
> > > > Post message: AN1x-list@yahoogroups.com
> > > > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > > > List owner: AN1x-list-owner@yahoogroups.com
> > > >
> > > > Shortcut URL to this page:
> > > > http://groups.yahoo.com/group/AN1x-list
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > Community email addresses:
> > > Post message: AN1x-list@yahoogroups.com
> > > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > > List owner: AN1x-list-owner@yahoogroups.com
> > >
> > > Shortcut URL to this page:
> > > http://groups.yahoo.com/group/AN1x-list
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@yahoogroups.com
> > Subscribe: AN1x-list-subscribe@yahoogroups.com
> > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> > List owner: AN1x-list-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> > http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Thu, 12 Jul 2001 14:18:30 -0000
From: jondl_2000@...
Subject: Re: outputs
--- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
> nope...no clicking or poping at all. Just very little output. Do
you have
> a number to customer service?
Go here...http://www.yamaha.com/service.htm
Also do you think it would be bad to use the
> headphone output for now? Becasue I use this synth live and have
gigs
> coming up. Also could it be some how one of my other pieces of
gear that
> casued the problem.
The only way to determine where the problem lies is, as Ed implied,
through process of elimination. You're running the synths to a Line
Mixer and then to a main mixer, right? So, unplug everything and
reconnect each instrument individually. I'd suggest removing one or
the other mixer from the equation to begin with and repeat the
exercise with each mixer. If the Yamaha continues to misbehave in
each circumstance then at least you have something definite to take
to Yamaha tech support.
I suspect it will okay to run off the headphone output for the time
being. Depending on your monitoring situation, i.e., mono vs. stereo,
you might require a stereo y-cable.
I have a rolls rack mixer and a korg mono poly running
> through it too. With an older yamaha mixer I had the mono poly
would cut
> the output on the rest of the synths to almost nothing. I think it
was just
> the mixer tho.
>
> TIA,
> Jake
Let us know how it works out.
Jon
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Wed, 11 Jul 2001 23:18:19 -0400
From: "Rich Allen" <skyclad@...>
Subject: Re: Digest Number 471
Interesting in a sort of 70s prog way..................a lil PFM and
triumvirat in there eh?.......ric
The musicianship was good.....................production a lil
lacking.........but you may want that live sound. Sounds like it was playing
through a peavy PA.
----- Original Message -----
From: <AN1x-list@yahoogroups.com>
To: <AN1x-list@yahoogroups.com>
Sent: Tuesday, July 10, 2001 4:37 AM
Subject: [AN1x-list] Digest Number 471
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
> ------------------------------------------------------------------------
>
> There is 1 message in this issue.
>
> Topics in this digest:
>
> 1. AN1X in a song - Warning, a self-serving post
> From: "Jerry Aiyathurai" <tuskerfort@...>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 1
> Date: Mon, 09 Jul 2001 13:41:50 -0000
> From: "Jerry Aiyathurai" <tuskerfort@...>
> Subject: AN1X in a song - Warning, a self-serving post
>
> AN1Xers:
>
> I have a song on my website (The Isles Shall Wait) I would like your
> feedback on. It's a fusion of ceylonese baila and prog-rock. The AN1x
> is responsible for all the monophonic leads in the song, as well as
> the pulse-wave minimoog sounds (duophonic) just before the end.
>
> The url is:
>
> http://www.tuskerfort.com/music.htm
>
> I'd appreciate any specific critique of the sound design for the AN1X
> sounds. Thanks for listening.
>
> Jerry
>
>
> http://www.tuskerfort.com
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Thu, 12 Jul 2001 21:52:12 BST
From: DMANX@...
Subject: new win2k driver?
Hi,
is it safe to use the new win2000 drivers.I noticed that fellow members have
noticed directX errors in cubase5,WHEN going into directX setup,especially
when you use 2 soundcards(one supporting directX).The previous driver was ok
when steinburg released patch R5.With these new drivers the problem looks as
though it has returned according to fellow users comments?Has enyone tested
it in the latest version of cubase5?
Regards Dmanx
--------------------
talk21 your FREE portable and private address on the net at
http://www.talk21.com
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Fri, 13 Jul 2001 01:34:45 -0000
From: jondl_2000@...
Subject: Re: new win2k driver?
--- In AN1x-list@y..., DMANX@t... wrote:
>
> Hi,
> is it safe to use the new win2000 drivers.I noticed that fellow members
have noticed directX errors in cubase5,WHEN going into directX
setup,especially when you use 2 soundcards(one supporting directX).The
previous driver was ok when steinburg released patch R5.With these new
drivers the problem looks as though it has returned according to fellow
users comments?Has enyone tested it in the latest version of cubase5?
I'm sorry but it sounds to me as though you've answered your own
question.
"With these new drivers the problem looks as though it has returned
according to fellow users comments?"
....?
> Regards Dmanx
>
regards,
Jon
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/