Hi,
I have a similar problem on my AN1x, but in my case, it is distortion on
outputs. Since the headphone outs sound fine, I don't think it is my
patches being too loud (assuming that it is not distorted at D/A stage). I
remember it was working fine before, so this problem started at some point.
So I have been using Y cable from phone out for a several months now (I have
forgotten that I have been doing this!).
Jon, you have mentioned "pops and clicks" at start up - I do have that
problem. I bought this unit from SamAsh for $500, but I don't know if it
was new, or a factory refurb, and I never had it serviced. Is what I am
experiencing the "old problem" you have mentioned??
Thanks,
-Yutaka
> --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:
>> The outputs on my An1x have hardly any output. It seems like they put out
>> some sound and then fade off really quick. The headphone output works fine
>> but the main left and right is very low. Any ideas what could casue this?
>> It was working fine and then nothing.
>>
>> TIA,
>> Jake
>>
>>
>
> Yikes!
>
> Jake, I've not heard of that problem with an AN1x. Has anybody else on
> the list?
>
> Did your AN1x ever exhibit the infamous 'popping and clicking' sound at
> start-up? If so, did you (or a previous owner?) ever have the repair
> affected by Yamaha? I ask these questions only to see if there's any
> relation between the old problem (the audible crackling) and the
> problem you've descibed (audio drop-off.)
>
> I'd hazard a guess this is a service issue and encourage you to contact
> Yamaha Customer Assistance or a local Service Center. Prefably one that
> you TRUST!. FWIW - I had the hardware repair for the 'old' problem
> completed some time ago and have never had a reoccurence.
>
>
> HTH,
>
> Jon