--- In AN1x-list@y..., Mark Pipher <mpipher@m...> wrote:
> I have a plg150-an card in my cs6x, and I've rtfm's many times
tonight and
> in the past but something just is not working according to what the
manual
> states. I'm trying to sync the plg card's arpeggiator and step
sequencer to
> midi clock.
>
> The manual says to twiddle around the menus and change the "Tempo"
setting
> to "midi". There should be the options of "vce", "midi", and "40-
240". I
> don't get the "midi" option for some reason. The only way I was
able to set
> it to midi was if I turned the knob all the way down and then press
the
> INC/YES button once. the "midi" option isn't there when I twiddle
the knob.
> Does anyone else have this problem?
Strange...sounds like the issue is specific to the CS6x. Have you
checked the CS6x list?
>
> My second problem is that I don't hear anything when I set it to
midi. The
> CS6x syncs fine to midi clock, as does my MicroModular. The PLG
card just
> won't at all. What gives?
In my experience with the AN1x, a Voice will not sound when the Tempo
is set to MIDI unless the unit is receiving MIDI Clock from an
external source. It makes sense when you thing about it - when set to
MIDI how else would the unit 'know' what tempo the ARP/SEQ should
playback?!
>
> It used to sync fine when I had the card hooked onto my SW1000XG as
the
> host. I've been tearing my hair out for a few hours. I haven't seen
anyone
> else having this problem.
At least you know the PLG150AN card is functional.
>
> Thanks in advance.
> Mark
regards,
Jon