Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [AN1x-list] AN1x Edit sends Setup changes

From: "Ed Edwards" <edward.edwards@...>
Date: 2001-04-12

Thanks for elaborating on this. I'd been frustrated for a while, and I
guess because I was using the Send button regularly. Now I'll avoid it
(unless loading my personal backups).

Ed


----- Original Message -----
From: "Gary Gregson" <gary@...>
To: <AN1x-list@yahoogroups.com>
Sent: Thursday, April 12, 2001 5:13 AM
Subject: RE: [AN1x-list] AN1x Edit sends Setup changes


> Hi Ed,
>
> When you select a patch An1xEdit sends the patch. This includes patch
matrix
> parameters (in the same way that patches selected at the keyboard do).
There
> is nothing you can do about that...Matrix is (and should be) part of
patch.
> The Matrix controls how the patch responds to certain controllers. It does
> NOT change what the controllers send!!
>
> Patches do not include the system parameters (Transmit Channel, Keyboard
> Transpose, Controller Device and Controller Number settings). These system
> parameters are only transmitted if you perform a refresh synth (from the
> Util menu) or hit the SEND button in the System area of the library page.
> (They may also be sent if you have the AutoUpdate option checked under
Setup
> and are switching between multiple loaded libraries!).
>
> If you are observing the send information setup of various knobs changing
> then you are altering the system somehow...not the patch. In your example
> assigning a knob to Tempo is only available as a system function (you
cannot
> setup a patch to perform this mapping via the Matrix)
>
> Regards
>
> Gary Gregson
>
> Email:gary@...
> http://www.yme.co.uk/yme
>
> -----Original Message-----
> From: Ed Edwards [mailto:edward.edwards@...]
> Sent: 12 April 2001 00:14
> To: AN1x-list@yahoogroups.com
> Subject: [AN1x-list] AN1x Edit sends Setup changes
>
>
> This question is directed to Gary, about the editor software.
>
> When a patch is sent to the AN1x, it also sends the parameters for the
Setup
> row of the matrix. This can cause a lot of frustration at minimum due to
> the Transmit Channel, Keyboard Transpose, and especially the Controller
> Device and Controller Number settings being changed. For instance, if a
> patch is loaded, and I've been using Knob 4 as Tempo, the editor changes
> that setting to what was in the patch.
>
> Is there any way of preventing these changes from going to the synth?
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>