Hello Gerry,
I have had a look at the patch that you are talking about and the way to
stop the distortion is to turn the volume down on the patch to about 80,
with my copy of the patch the volume is set to 127, this is causing the
distortion, If you increase the release on the VCA from 0 to 8 that
should sort that out the click at the end of a note. I can't hear a
click on the beginning, but if you can then you need to increase the
attack on the VCA a little bit as well. Doing the VCA attack/release
thing helps with a lot of sounds with clicks at the front and back of
them, but don't overdo it as it will change the sound if you go to far.
In article <
98lhcr+7ltd@...>,
tam_ger@... writes
>i loaded a patch called "wormhole" from the D&B set,
>http://www.samplelibrary.net/archive/an1x/SoundBanks/DnB_Basses.an1
>and am having a odd problem with the sound. The patch is very deep
>and bassy, with a little distortion to give it that grungy sound.
>However i notice a very audible pop (almost like static) at the very
>begining of the keystroke, and at the very end. Even if i press the
>key super slow i first get the pop then the patch sound. I have
>tried to muck about with the filters like cut-off and res, but the
>sound is still there, and ultimatly the patch is changed to something
>i don't like. I have noticed this with a few other super bassy
>patches.
>There is no way i can play with it sounding like this.
>Any idea's or similar stories??
>
>Frustrated
>
>Gerry B
>
>
>
>Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
See ya,
Reggie