Ok, now I feel like I'm talking to myself.
Reggie...you are right. If I set the DSP Factory to 48k, the sblive sounds
great. The only problem is that I will still have to "record" the output of
the sblive (probably part by part)when I get ready to go to mix. I suppose
that I can use the sblive in it's noisy connection so that I can compose,
then, switch to the digital out/in and switch to 48k and record the parts,
then switch back to SERIAL so that I have my sw1000xg digital connection
back. I'll have to give this more thought. Though I think I got that test
done in about 10 minutes <g>.
Blades
----- Original Message -----
From: "Blades" <redbrickdream@...>
To: <AN1x-list@egroups.com>
Sent: Monday, December 11, 2000 10:13 PM
Subject: Re: [AN1x-list] OT: sampler or computer
> Well, yes, I think that's true, but I have to try that. I know that if I
> set the DSP Factory to anything but "SI" or "Serial Interconnect" for the
> clock source, I cannot hear the sw1000xg at all. Now, I suppose I could
do
> that, just to get the SBLive stuff to wav and then switch it back. I need
> to look into that as an option. Not perfect, but an option that seems
> somewhat better than what I have now.
>
> The wordclock is the only place to set this, no?
>
> I suppose this is getting a bit more off topic, isn't it. Ooops. Sorry
> guys. Well, at least it's still Yamaha. <g>
>
> Blades
>
> ----- Original Message -----
> From: "Reggie" <reggie@...>
> To: <AN1x-list@egroups.com>
> Sent: Monday, December 11, 2000 7:08 PM
> Subject: Re: [AN1x-list] OT: sampler or computer
>
>
> > Hey blades, I thought that the DSPF digi in can handle 44.1Khz, 48Khz
> > both at varispeed, I know that when I pipe DVD into it, it syncs to
> > 48Khz, So why can't you fire the SBLive into the DSPF?
> >
> >
> >
> > In message <200012111823.AA247661044@...>, redbrickdream
> > <redbrickdream@...> writes
> > >My only problem is this:
> > >
> > >I can use the SBLive for the triggering of Giga or whatever else, but
the
> > >outputs are so noisy on the SBLive. Have you found a way around this?
I
> hear
> > >the mouse moving in the speakers and all sorts of other "rif-raf".
> > >Unfortunately, I can't use the SPDIF out into the DSP Factory's SPDIF
in
> because
> > >the SBLive is locked at 48k instead of 44.1k. Makes me really angry.
> Need to
> > >use the SBLive in order to take advantage of soundfonts that can use
> system
> > >memory, so the "superior" AWE Gold (because of its 44.1k digital outs -
> this is
> > >right isn't it?). But I can't really use it at all because of the
noise
> floor
> > >involved.
> > >
> > >I suppose I could loop back internally, so that the analog and digital
> outs
> > >don't have to be used, and then point the resulting wav file out to a
> different
> > >audio port...but what a pain is that?!?!
> > >
> > >Blades (just venting)
> > >
> > >---------- Original Message ----------------------------------
> > >From: teomi@...
> > >Reply-To: AN1x-list@egroups.com
> > >Date: Mon, 11 Dec 2000 18:14:36 EST
> > >
> > >>I don't agree that you need an expensive card for low latency....even
> the
> > >>Creative AWE64 GOLD ($60) delivers no latency at all when playing soft
> synths
> > >>live (giga, reality, Reaktor)
> > >>it is not so much the sound card but how your system is setup...you
can
> get
> > >>the best sound card out there but a poorly organized windows and
> hardware
> > >>will deliver bad latency
> > >>
> > >>i use AWEGOLD just for monitoring and midi recordiong of soft synths,
> and a
> > >>high end RME Hammerfall card for actually recording and mixing. it
works
> > >>Killer!
> > >>
> > >>Eitan Teomi.
> > >>
> > >><A
HREF="http://ourworld.cs.com/teomi">http://ourworld.cs.com/teomi</A>
> > >>
> > >>
> > >>Community email addresses:
> > >> Post message: AN1x-list@onelist.com
> > >> Subscribe: AN1x-list-subscribe@onelist.com
> > >> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > >> List owner: AN1x-list-owner@onelist.com
> > >>
> > >>Shortcut URL to this page:
> > >> http://www.onelist.com/community/AN1x-list
> > >>
> > >>
> > >
> > >
> > >Community email addresses:
> > > Post message: AN1x-list@onelist.com
> > > Subscribe: AN1x-list-subscribe@onelist.com
> > > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > > List owner: AN1x-list-owner@onelist.com
> > >
> > >Shortcut URL to this page:
> > > http://www.onelist.com/community/AN1x-list
> > >
> >
> > --
> > Reggie
> >
> >
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
> >
> >
>
>
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>
>