That's disappointing to hear regarding Yamaha Tech Support. My
experiences have all been positive - I wonder whay the lack of
consistency? Anyway...are you hodling the ASSIGN button down the entire
time it takes for the AN1x to power on? On my unit the display show
"Ctrl Mode mode2" for a couple of seconds before the display switches
to the last used Voice.
Jon
--- In
AN1x-list@egroups.com, "David Bagshaw" <epiphanius.geo@y...>
wrote:
> Actually, Jon, no, it still doesn't work. There is no difference in
> the display whether I press assign or not. Somewhat annoying, at this
> point. I'd love to find out what I'm doing wrong. I tried to get help
> at the Yamaha U.S. site, but I'm Canadian, and they won't offer
> support to me. The Yamaha Canada site is dreadful.
>
> Thanks for your help anyway Jon, for your site and for your
> contributions to this one.
>
>
> --- In AN1x-list@egroups.com, jondl@j... wrote:
> > David,
> > Did you ever get this woring? I tried it again tonight for the 1st
> time
> > in months - Turn the power off; hold the ASSIGN button; turn the
> power
> > on (while still holding the ASSIGN button.) The display will show
> which
> > Control Change Mode the AN1x is in - 1 or 2. Repeat the process to
> > change back from one mode to the other. The MIDI CC behavior is
> > documented on Page 9 of the Data List pamphlet. Pretty cool stuff
> if
> > you like to record some serious patch changes into a sw sequencer.
> >
> > Jon
> >
> >
> > --- In AN1x-list@egroups.com, "David Bagshaw"
> <epiphanius.geo@y...>
> > wrote:
> > > It says in the manual to hold the "assign" button while powering
> up
> > > in order to change the control change mode, and that the mode
> number
> > > (1 or 2) will appear on the display. I've tried dthis several
> times
> > > and nothing changes, and nothing appears in the display. is there
> a
> > > typo in the manual (i.e. is there another way to change to
> control
> > > change mode 2)?
> > >
> > > Thanks,
> > >
> > > David