To invoke the Factory Reset: Powering off the AN1x; hold down the 7-8-
9 keys simultaneously; turn the power on (while holding down the 7-8-
9 keys.) The AN1x should prompt you what you want to reset, i.e.,
Voices 1-64, 65-128, ALL, etc. - I don't recall the specific reply
for each off the top of my head.
Don't forget, a Factory Reset will erase any user edits! If there is
something you don't want to loose - back up you Voices 1st. If you
need a User Manual the .PDF version can be had from the Files section
here at eGroups.
From your problem description I would ∗guess∗ that you inadvertently
reassigned Key Position or Key Velocity to Pitch Bend or LFO depth -
something along those lines. If the problem persists after the reset
I'd email Yamaha Tech Support for help...this problem sounds like one
previously described on the list some months ago...
Good luck.
Jon
--- In AN1x-list@egroups.com, "Richard King" <numanoid@m...> wrote:
> Hello all. My an1x is going bonkers now. I accidently turned off
> local use and nothing was coming out of it. I didn't realize I had
> done this, so I started changing parameters until I found the
> culprit. Now, the modulation/ribbon control is crazy. If I play a
> note, it sounds ok at first, then goes haywire with random
> modulation, almost as if I were going to town on the ribbon
> controller. Velocity definitely makes a difference. I have not
> ruled out the fact that something may be damaged, but I want to
know
> if there is a factory reset to being the thing back to as normal as
> it can be. I'll service it after that if the problem persists.
>
>
> Thanks,
>
> Rich