David Bagshaw shared with us:
> It says in the manual to hold the "assign" button while powering up
> in order to change the control change mode, and that the mode number
> (1 or 2) will appear on the display. I've tried this several times
> and nothing changes, and nothing appears in the display. Is there a
> typo in the manual (i.e. is there another way to change to control
> change mode 2)?
Nope, it's the only way (as far as I'm aware): hold down the Assign
button, power on the AN1x and keep the Assign button pressed until
'Mode 1' or 'Mode 2' appears in the screen.
- Peter