Had the same problem. It's easily fixed.
The following solution is documented on my website http://www.jdlx-
musique.com/support/an1x/tt_receive.htm
To summarize:
From within AN1xEdit, use the MIDI Port Setup function under the
Setup menu to select the AN1x from the list of devices. These devices
are the ones defined in your OMS Studio Setup document. I've found
that on occasion toggling back and forth between a device other than
the AN1x and then back again has been necessary before AN1xEdit will
receive data correctly.
AN1xEdit loses the connection to the AN1x definition in OMS ∗every∗
time I make change or update my current Set-up Doc. The first time I
had this problem I'd just switched MIDI Interfaces and it took me
weeks of playing around until I found the answer! Now I just toggle
between devices in AN1xEdit and it immediately reestablishes
communication.
Let me know if you still have problems and I'll try to help.
Jon
--- In AN1x-list@egroups.com, numuse@m... wrote:
> I'm on a G4/400 OMS 2.3.8 AN1X editor 1.1 G-port w/Midi
> Timepiece II
> OMS and the MTP see the AN1X just fine. when I test the device
> in OMS setup I hear sound. Further, when I play the AN1X I get
> signal to my MTP. But when I try to send a patch or a bank-or try
> to receive a patch or a bank I get the "receive error" dialog box.
> I checked the midi device # in OMS and the AN1X, that all sems
> right. There doesn't seem to be any "write protect" type setting on
> the synth. I'm out of ideas. Can anyone help???