My personal complaint about the aftertouch is that there is no way of
adjusting the sensitivity. By this I don't mean the effective level of the
parameter AT applies to a function -- everyone knows that you can adjust the
amount in the matrix. What I'm talking about is that the pressure strip is
too sensitive and sends aftertouch too easily with just a light touch. Has
anyone ordered a service manual for the AN yet? If so, maybe we could look
at the schematics and see what might be altered to adjust sensitivity.
> -----Original Message-----
> From: jondl [mailto:jondl@...]
> Sent: Tuesday, March 28, 2000 7:11 PM
> To: AN1x-list@onelist.com
> Subject: Re: [AN1x-list] turn off aftertouch
>
>
> From: jondl <jondl@...>
>
> Aftertouch is programmed at the Scene level. Use the
> Parameter Knob to
> select the Voice/Scene Setup menu; use the Set No., Param, Source, and
> Depth buttons to toggle through the Source value for each Set
> No. until
> you identify 'AT' for Aftertouch as the Source; you may then use the
> Param button to determine where AT is routed and the Depth button to
> determine to what degree the Param value will be offset by
> AT. This can
> be a negative or positive value (handy that is!) so you can reduce or
> increase the mod depth by AT.
>
> If you do not want AT to result in any modulation - change the Param
> value to 'Param Off' or choose a new Source of your liking.
>
> Personally, I find the lack of AT routings on the AN1x to be a bit
> boring. As a consequence, I often try to use AT in my patches. Check
> out MhtlLead in the JDLX-Musique folder here at Onelist for
> an example.
> On the other hand, 'classic' analog synths didn't have AT - and often
> didn't include Ribbon Controllers either - so patches without AT could
> be considered more 'authentic' I suppose ;-)
>
> Hope this helps,
> Jon
>
> tspeer wrote:
> >
> > From: tspeer <tspeer@...>
> >
> > I may be alone here- but I use my AN1-x as my main controller.
> > -and I find its monophonic aftertouch ..a bit too easy to trigger.
> >
> > yes- I've read the manual- but I cannot seem to find out how to turn
> > aftertouch off.
> >
> > Has anyone else run into this?
> >
> > Todd
> > http://users.ev1.net/~xpander/smcchome.html
> >
> >
> --------------------------------------------------------------
> ----------
> > Good friends, school spirit, hair-dos you'd like to forget.
> > Classmates.com has them all. And with 4.4 million alumni already
> > registered, there's a good chance you'll find your friends here:
> > http://click.egroups.com/1/2623/4/_/663009/_/954263955/
> >
> --------------------------------------------------------------
> ----------
> >
> > Community email addresses:
> > Post message: AN1x-list@onelist.com
> > Subscribe: AN1x-list-subscribe@onelist.com
> > Unsubscribe: AN1x-list-unsubscribe@onelist.com
> > List owner: AN1x-list-owner@onelist.com
> >
> > Shortcut URL to this page:
> > http://www.onelist.com/community/AN1x-list
>
> --
> http://www.jdlx-musique.com/
>
> Community email addresses:
> Post message: AN1x-list@onelist.com
> Subscribe: AN1x-list-subscribe@onelist.com
> Unsubscribe: AN1x-list-unsubscribe@onelist.com
> List owner: AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
> http://www.onelist.com/community/AN1x-list
>