Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [AN1x] osc sync

From: "jammie" <jammie.emma@...>
Date: 2013-12-21

where does he get the sin wave from
 
on page 61 it tells you the waves available
 
when vco1 is set to not sync you have available saw  pulse saw2 and mix of saw+pulse
 
now when sync is on
 
osc1  has available saw pulse innr1 innr2 innr3
 
now what ever the master is set to the slave will be the same you CANT choose
 
a different waveform for master  and  slave
 
slave will always be set to the waveform of the master
 
unlike analog synths that you can change different waveforms on each osc but because the vco1 is one osc
 
and splits into 2 it can only have the same waveform but its outcome is the same
 
one of my favorite sync synths is the dss1 and the dsm1 as you can use additive waveforms and can have different one on each osc and set to unison you can have all 16 osc play and sync at the same time very fat sounds
 
 
----- Original Message -----
From: jammie
To: AN1x-list@yahoogroups.com
Sent: Saturday, December 21, 2013 6:58 PM
Subject: Re: [AN1x] osc sync

 

when in sync mode osc 1 becomes a dual osc with master and slave osc
 
what ever the master osc is set the slave osc waveform is set the same but resets on the starting of the osc master waveform so any modulation put on either the slave will always reset to the starting of the master osc waveform
 
which is the same for most master slave osc
 
but the an1x in this mode also has osc 2 still which can have any waveform set
 
and so you get a 3 osc synth
 
this is what sets it apart as a va synth from the jp8000
 
the master and slave osc are summed going into the mixer which is osc1 mixer input as its still only osc1
----- Original Message -----
From: Summa
Sent: Saturday, December 21, 2013 3:25 PM
Subject: Re: [AN1x] osc sync

 

The AN1x is selfsyncing with an virtual master oscillators, therfore
its like having a 3 Oscillator synth.
Since in case of sync the master simply resets the slave waveform and
otherwise has no real purpose, typically been removed mixer wise,
it's no loss.

On 20 Dec 2013 at 4:38, jim.alciere@... wrote:

>
>
>
> I should know this: when I use Osc Sync, I know what the master
> waveform is, it's whatever I choose for vco 1. How do I know what the
> slave osc waveform is?
>
> Thank you.
>
> Jimmy
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe:AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
>
>
>
>

--

CZ/VZ mailing list : http://groups.yahoo.com/group/CZsynth
FMHeaven mailing list : http://groups.yahoo.com/group/fmheaven/
FS1R mailing list : http://groups.yahoo.com/group/fs1r/
Vokator mailing list : http://groups.yahoo.com/group/vokator
FM-Synthesis mailing list :
http://groups.yahoo.com/group/fm-synthesis/

http://www.summasounds.de/

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6939 - Release Date: 12/21/13

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6939 - Release Date: 12/21/13