Bruno, thank you very much. Now you have pointed it out, it seems obvious that a dump request with a specific address would return the parameter value for that address - although not so obvious that the data list/manual would bother to explicitly state it! My slight concern is that the H/M/L addresses referred to might be only Data Table <1-1>, the bulk dump types, rather than Table <1-2>, the Parameters.
Tonight, I will set up some tests in MIDI-OX to see if a Parameter request returns anything, then try to set up the request/parameter setting in TB MIDI Stuff. Many thanks again for you help - I'll report back.
Bill
--- In AN1x-list@yahoogroups.com, Bruno <brunorc@...> wrote:
> Isn't the (3-5-5) DUMP REQUEST command the thing you need? I'm just looking at the Data List (page 13), no possibility to check it with my AN1x in the next few hours... but it seems you can specify the address of the parameter you want, and it will send the value back to you. Seems like Current Voice/Pattern data can be freely accessed, while User Voice/Pattern data has "(only Bulk Dump)" annotation.
> So, how I see it is that if you want to request a dump of the whole Current Voice, you would specify the address "10 00 00", but if you only want to access the Arpegggio Hold param, you would use "10 00 54", and so on.
> Cheers,
> Bruno
>