Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list
Subject: Re: No sound output due to low battery?
From: "yp_artist_guy" <artlythere@...>
Date: 2013-04-07
--- In AN1x-list@yahoogroups.com, "usillosptinto" <quesada@...> wrote:
"The volume pot was broken and l lying around in the box. Packaging was pretty bad. I suspect it might have been damaged during shipping. This is in Germany, where the word 'sorry' doesn't get much use. The seller says it was ok when he shipped, and scoffed any responsability. I opened a complaint on paypal... we'll see. "
Do you mean the shaft is laying around in the box, with knob?
If the volume pot was turned down all the way, and broke at the base of the shaft, it may still be at zero volume, assuming the solder joints or PCB board was not compromised from the stress (cracked, etc)
You can, if you haven't, try turning it up clockwise, using a screwdriver or fine pliers, to see if you can rotate it. That might gain you some level.
If banged up in shipping, and that isn't it, loose connections in the ribbons are likely, or broken connects at the jacks or other areas, potentially.
Ebay seller is responsible for delivering you an item as stated, and if otherwise filing a damage claim on your behalf, however if they packed it poorly, then the shipper will deny the claim.
Paypal will work in your favor most times if item arrived not as described.