Bill, I forgot to mention I also have a Yamaha Fs1R so the Plg-Dx is less useful to me (when plugged into the Motif). Another plus, should be the An-plg hosted into the Motif because of the fx section and overall better editability (I hope).
--- In AN1x-list@yahoogroups.com, "twobeelandscape" <bill@...> wrote:
>
> Lucio
> >Anyway, is there any danger int swapping cards?
> Probably the biggest danger is physically damaging the cards when removing/inserting. I have read elsewhere that they can be difficult to remove due to locking tabs - not tried it myself. There is unlikely to be any danger of the boards being electrically incompatible as they will all have the same contact system.
>
> However, if you have a functional AN200 containing a PLG150-AN, and a Motif Rack containing a PLG100-DX and VL, it's not clear what is the benefit of swapping boards around to get a non-functional (non-editable, non-saleable) AN200 with DX card, and Motif with AN and VL. What are you trying to achieve?
>
> Bill
>
>
> --- In AN1x-list@yahoogroups.com, "cristoforcolombo" <sharm.band@> wrote:
> >
> > Well, thank you Bill and Jammie. I'm asking this prior to swap dx and An plg's I got. Well, I have a Motif Rack classic, also, with a Dx and Vl plg's. And I would install the Dx plg into the AN200 and the 150An into the Motif. Anyway, is there any danger int swapping cards?
> > Lucio
> >
> >
> > from the An200--- In AN1x-list@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> > >
> > > no one knows as no one has tried it
> > >
> > > but i would think that theres an os eprom that controls it and has the functions of each board to control the front panel features
> > >
> > > and also the sysex implementation
> > >
> > > i would get yourself a cheap module that allows 2 cards
> > > ----- Original Message -----
> > > From: marcus gaudio
> > > To: AN1x-list@yahoogroups.com
> > > Sent: Saturday, June 09, 2012 10:36 PM
> > > Subject: Re: [AN1x] Re: Hi all: is it possible to insert a PLG150-DX into a AN200?
> > >
> > >
> > >
> > > ok
> > > so it's possible or not?
> > > thanks
> > >
> > > ________________________________
> > > Da: twobeelandscape <bill@>
> > > A: AN1x-list@yahoogroups.com
> > > Inviato: Sabato 9 Giugno 2012 17:58
> > > Oggetto: [AN1x] Re: Hi all: is it possible to insert a PLG150-DX into a AN200?
> > >
> > >
> > > Typo error, the PLG150-DX device ID should have been 01100010 62H. Anyway, the important thing is that it is different to the PLG150-AN.
> > >
> > > Bill
> > >
> > > --- In AN1x-list@yahoogroups.com, "twobeelandscape" <bill@> wrote:
> > > >
> > > > There is a further complication in that the PLG150-AN and PLG150-DX have
> > > > different device IDs for receiving MIDI system exclusive data (01011100
> > > > 5CH and 01011100 5CH respectively).
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>