Hi,
It is actually very simple to fix. Remove all the screws (I think there are 32) on the backside. Gently lift away the black back cover.
Please take a look at the attached PDF-document.
1) Gently unplug the 3 connectors, marked with red circles.
2) Remove the little print board
3) Unfasten the larger print board and remove it
4) Now you can see all the connectors from the keys. Use a cotton bud or similar to clean.
5) Gently remove all other dust before assembly
I hope that it works - it takes only half an hour. Please let me know how it went.
Best regards
Henrik :-)
Copenhagen
Fra: Andy Funnell <
andy.funnell@...>
>Til: AN1x-list@yahoogroups.com
>Sendt: 16:58 fredag den 16. september 2011
>Emne: Re: [AN1x] Lowest C is silent on my AN1x
>
>
>
>
>
>
>Hi JF:
>
>If you have a moment, please could you detail how to do this - I have the same problem with the bottom C.
>
>You make it sound fairly straightforward, so would appreciate any tips.
>
>Many thanks in advance,
>
>Andy
>
>a.k.a. "fallingman"
>
>
>
>
>
[Non-text portions of this message have been removed]