Hi,
Looking at the message, I can say that you definitely have a problem for two reasons:
1) The fifth and sixth bytes in an AN1x SYSEX message give the length of the message as a fourteen bit word. So the value from the dump below, 100E, is 080E or 2062 in decimal. A voice bulk dump is 796 bytes in length, and user sequences are only 46 bytes.
2) The seventh to tenth bytes in an AN1x SYSEX are an "address" that identifies the data in the message. The value 000600 is not a valid address.
Valid address can be found in the AN1x Data List/MIDI manual at the bottom of page 13. E.g. a user voice message has the address 10mm00 where mm is the voice number (0-127).
So at a guess I would say that your interface is losing a whole load of data. AN1x edit would not be happy with the length of the message or the address of the message, and the checksum would also equally be wrong as well.
I know in general that some people have problems with these USB to MIDI leads. Have you tried it with a different interface? Can you borrow one off of a friend to try it?
My AN1x works happily on a MOTU MidiExpress, which is a USB interface, so the fact that your connecting via USB is not the issue, more probably what you are using to make the connection.
Cheers
Derek
--- In AN1x-list@yahoogroups.com, "lancerael" <lancerael@...> wrote:
>
> Hi there,
>
> I've recently brought my AN1x out of hibernation and I'm trying to get everything set up. My current computer doesn't have a joystick port so I've had to use a usb to midi cable. It seems to work fine for standard midi in and out but when I try to use the editor to request or dump data, it just doesn't work. Nothing happend on send, and I get a popup saying "Receive Error" when I try to request data.
>
> I've used midi-ox to monitor the midi data. When I initialise a bulk dump from the synth the monitor software is able to recieve the following data
>
> 000014C5 1 -- F0 Buffer: 55 Bytes System Exclusive
> SYSX: F0 43 00 5C 10 0E 00 06 00 00 00 3C 48 46 48 48 4B 3C
> SYSX: 46 46 48 6D 32 6E 70 52 64 73 64 44 4A 61 3C 3C 3C 3C
> SYSX: 3C 3C 3C 3C 3C 3C 3C 00 00 00 00 00 00 00 00 00 00 28
> SYSX: F7
>
> Does anyone have any idea why AN1xEdit would have these problems to send and recieve? I'm going nuts trying to figure this out!
>
> Many thanks,
> Lance Taylor
>