most emu stuff can most yams can
the kuaweil range of synths can
----- Original Message -----
From: Jeff
To: AN1x-list@yahoogroups.com
Sent: Friday, July 16, 2010 11:09 AM
Subject: Re: [AN1x] Disable program change MIDI transmission
Hello !
maybe you can try another way : look at your other instruments, some
synths can filter incoming program change messages. In my personnal
instruments only the Kawaï K1 can send or not program change messages
(and a few others but i don't remember...).
Cheers.
J.F.
Peter Korsten a écrit :
>
> Op 13-7-2010 22:22, jeromestpierre schreef:
>
> > I cannot find out how to disable the program change MIDI messages
> that are sent whenever I change the patch number while controlling
> another synth.
> >
> > I looked in the manual and I couldn't find anything but I am still
> skeptical.
> >
> > Is it possible to turn that off?
>
> Possibly, you would need an external MIDI filter for this. But what sort
> of set-up do you have that requires you to change the program, but only
> locally? Or are you using the sound engine of both the AN1x and the
> external synth?
>
> On my EX5, you can set several zones on the keyboard, and per zone
> indicate whether a zone goes to the internal sound engine, MIDI out A,
> MIDI out B, or any combination thereof. But program change messages are
> still transmitted.
>
> - Peter
>
>
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3008 - Release Date: 07/15/10 18:35:00
[Non-text portions of this message have been removed]