Hi Jammie,
Yes I have an option to disable SysEx messages on the external synth. I turned it off and it didn't work so it means it is using MIDI CC.
Can I setup the ANX1 to transmit SysEx messages instead? I will look in the manual but I don't remember seeing this option.
Thanks
--- In AN1x-list@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> is the an1x sending it in sysex or midi cc if its sending sysex there should be a filter in you other synth were you can switch of sysex recieve
> ----- Original Message -----
> From: Peter Korsten
> To: AN1x-list@yahoogroups.com
> Sent: Wednesday, July 14, 2010 5:08 PM
> Subject: Re: [AN1x] Disable program change MIDI transmission
>
>
>
> Op 13-7-2010 22:22, jeromestpierre schreef:
>
> > I cannot find out how to disable the program change MIDI messages that are sent whenever I change the patch number while controlling another synth.
> >
> > I looked in the manual and I couldn't find anything but I am still skeptical.
> >
> > Is it possible to turn that off?
>
> Possibly, you would need an external MIDI filter for this. But what sort
> of set-up do you have that requires you to change the program, but only
> locally? Or are you using the sound engine of both the AN1x and the
> external synth?
>
> On my EX5, you can set several zones on the keyboard, and per zone
> indicate whether a zone goes to the internal sound engine, MIDI out A,
> MIDI out B, or any combination thereof. But program change messages are
> still transmitted.
>
> - Peter
>
>
>
>
>
> ------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.441 / Virus Database: 271.1.1/3003 - Release Date: 07/13/10 18:36:00
>
>
> [Non-text portions of this message have been removed]
>