Well, I have 2 PLG150-AN installed into my S90ES just to obtain a 10 voice polyphony.
They reside into slot 2 and 3 respectively.
To be honest it's not a piece of cake obtaining a 10 voice polyphony, although the Poly Expand is always set to ON.
Due to the fact that I'm always using bank 036/002 (RAM) and I'm forced to load a bulk dump for both boards, it takes some trial and errors before everything works.
In other words I have to switch off and on Poly Expand two or three times until the boards "accept" the new settings.
When everyhing goes ok, you have a powerful engine at your fingertips.
On the opposite side, there are many advantages of having the two boards independent.
Think about having two independent arpeggiators that go in sync with the host one.
--- In AN1x-list@yahoogroups.com, "apuhjee" <apuhjee@...> wrote:
>
> Shameless bump. I'd love to hear from anyone using two PLG150-AN's.
>
> Thnaks.
>
>
> --- In AN1x-list@yahoogroups.com, "apuhjee" <apuhjee@> wrote:
> >
> > Is this possible? Maybe with a little time spent splitting a patch between the two cards?
> >
> > I've got a free slot in my CS6x and want to fill it before these cards all disappear.
> >
> > Cheers ~ jp
> >
>