whew!!! that stuff gets confusing
-----Original Message-----
From: edzealous <
edzealous@...>
To:
AN1x-list@yahoogroups.comSent: Sat, Jan 30, 2010 8:26 pm
Subject: [AN1x] Re: Triggering the AN1X Step Sequencer from an External Keyboard
Hey thanks for the all the info dudes. I actually got this working (sort of) today. I'll post up all the correct settings tomorrow when i'm in front of the keys, but it was setting the TI to 'Soft Thru'that got it working. The only problem is that though the sequence will trigger from the TI, i'm able to play over the sequence, whereas if I triggered it from the AN1X I wouldn't. The only way I can fix this is if I set the Seq to 'Hold' which I'd rather not do as I can't figure out how I'd stop it from the TI.....
All these problems because the £1850 TI doesn't have a bleedin step sequencer!
Thanks again,
Steve
--- In AN1x-list@yahoogroups.com, "jammie" <jammie.emma@...> wrote:
>
> read the manual if the keyboard can trigger the sequence the midi notes should also i know you can set the clock to external audio so ythat it tracks in time to an drum machine or external sequencer
>
> but it will only play the sequence loaded for that preset it cant control the sequencer so that you can change it on the fly it will only play the sequence thats in memory you can change the sequence but it will only play the sequence that is already programed that you change to
>
> your problem is that your playing the notes on the ti trying to trigger the ti sound to the an1x sequence
>
> it would be all right if you played the an1x triggering the ti as when you play the notes on the an1x the ti will play the sequence notes of the an1x output you would need the midi out into the midi in of the ti
>
> by trying to do it with the ti is that you are pressing the notes that are trigering the an1x which sequence is running but becuase you are holding down the notes on the ti the sound is playing but not the sequence this is becuase the ti cant retrigger notes that are already pressed this is imposible for any keyboard to do
>
> have you tried switching the ti to omni off so that it oly responds to external midi so that a external source can control the the synth and not the onboard keyboard i dont have a ti but i can do this on the quasimidi 309 drummachine synth
> ----- Original Message -----
> From: Gerald Raucamp
> To: AN1x-list@yahoogroups.com
> Sent: Friday, January 29, 2010 9:10 AM
> Subject: Re: [AN1x] Re: Triggering the AN1X Step Sequencer from an External Keyboard
>
>
>
> Hello,
>
> On Thu Jan 28 2010, edzealous <edzealous@...> wrote:
> >
> >
> > --- In AN1x-list@yahoogroups.com, "edzealous" <edzealous@> wrote:
> > >
> > > Hi, I was wondering if I can trigger the step sequencer patterns in my AN1X with an external Synth (ext synth being the sound generator). Specifically i'm trying to trigger step seq patterns in an AN1X from a Virus TI and have them sound on the Virus TI. At the moment I can only seem to trigger them if I use the AN1X keyboard. Any ideas if this is even possible?
> > >
> >
> > Sorry to re-post but does anyone know if this can be done??? Trying to sort this out urgently for a few gigs happing in the next two weeks and I'm no further on. I'm comming to the conclusion that its impossible but it would be great to get a definitive answer.
> >
> > Many thanks,
> >
> > Steve
>
> My understanding of the sequencer is that it can only be triggered from
> the keyboard. I remember coming across some posts, either on this list,
> or just out there on the internets on the same subject.
>
> The sequencer will send out midi data, but it cannot be triggered over
> midi. Check the AN1x manual starting from page 37 (english version).
> There's no mention of MIDI-triggered sequencing, only keyboard based
> triggering.
>
> Hope to have helped.
>
> Kind regards,
>
> Gerald
>
>
>
>
>
>
> ----------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.432 / Virus Database: 271.1.1/2653 - Release Date: 01/28/10 14:55:00
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]