Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

previous by date index next by date
previous in topic topic list  

Subject: Re: [AN1x] Re: AN1x Battery CR 2450 y vs n - Doesn't Matter!

From: audiomad99@...
Date: 2009-11-19

AWESOME info !!!!
thanks for posting your findings!!! ,...





-----Original Message-----
From: Teddy Ballgame <betteroffted@...>
To: AN1x-list@yahoogroups.com
Sent: Thu, Nov 19, 2009 9:23 am
Subject: [AN1x] Re: AN1x Battery CR 2450 y vs n - Doesn't Matter!





Just an update on my battery replacement endeavour. I Put in a non "Y" standard Energizer CR2450 and it popped right in with no problem. Fits securely and, for sure, is not going anywhere.

--- In AN1x-list@yahoogroups.com, audiomad99@... wrote:
>
>
> sorry to hear about the dead battery but an alternative would be great!!!! thanks for the info
>
>
>
>
>
> -----Original Message-----
> From: advanced_parapsychiatry <betteroffted@...>
> To: AN1x-list@yahoogroups.com
> Sent: Tue, Nov 17, 2009 12:45 pm
> Subject: [AN1x] Re: AN1x Battery CR 2450 y vs n
>
>
>
>
>
> I'm about to have that very same WTF moment.
> I just finished replacing a few of the failing keys on a very "used" AN1x I picked up and as soon as I had it all back together I got the Battery Low message. Bah.
> I couldn't find a CR2450y anywhere, either so I'm about to see how it fits tonight.
> Will report on my progress.
>
> --- In AN1x-list@yahoogroups.com, "ras_mynameisnottaken" <letterzbox@> wrote:
> >
> > Hi Folks,
> >
> > After 12 years of service, the lithium battery finally started to die. So I got a replacement battery model CR 2450n.
> >
> > The battery looks identical except I noticed that it doesn't fit in quite as well as the original. The original in my AN1x was a CR 2450y. I could not find a 2450y, perhaps Yamaha carries these?
> >
> > The diameter seems the same between the two, but one must be slightly thicker or something as I was unable to get the clip that olds the battery in place to click fully back on the way the y model battery did.
> >
> > This doesn't seem to affect the function of the battery at all and its still pretty secure as it takes a jeweler's screwdriver to pop-out, just avoid knocking around the synth incase the battery were to pop out (this is always good advice anyway).
> >
> > Just thought I would put this on the record for future battery swappers that have the WTF moment like I did :)
> >
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>









[Non-text portions of this message have been removed]