matt tucer a écrit :
>
> I'm on my second an1x and was quickly reminded of what drove me crazy about my first one. It's too quiet! Next to my ex Juno 60 and now my Kurzweil k2000 and electribe er1 mkll, it doesn't compete in volume. I always have to have the volume knob turn all the way up and it still doesn't stand out in a live mix unless I turn everything else down. Is there a solution to this that I am missing? Thanks
>
> [Non-text portions of this message have been removed)
Hello Matt?
where do you plug your AN1X?
The best way is to use a line input on a mixer or an amplifier with multiple inputs and set the gain (if available) of each channel to get the same audio level with each instrument. The microphone inputs are way too sensitive (i.e. the gain is too high) and their input impedance is too low (typically 600 ohms).
If you're using a line input without gain adjustment it could be an impedance mismatch between the AN1X and the amp....
Cheers.
J.F.