--- In
AN1x-list@yahoogroups.com, Jeff <jf.serviere@...> wrote:
>
>
>
> Hello!
> IMO, if the AN200 is like the others, the factory sounds are stored in a PROM. When you
perform a full reset the user memory (static RAM or flash EEPROM∗) is first cleared and
immediately after the whole content of the EPROM is stored inside. All this procedure is a
part of the synth OS, i don't think you can disable it with a MIDI sysex code....
From the AN200 User Guide, Factory Reset:
1) Turn the power off.
2) Simultaneously hold down the [SHOW VALUE], [PATTERN] and [EXIT] buttons, and turn on
the power again.
Jon