--- In
AN1x-list@yahoogroups.com, "Arthur Alexander Crichton" <ac010b4919@...>
wrote:
> Thanks for all the replies but as stated on my last post I think I
> fixed the problem as I have used my AN1x for 2 days now without any
> of the sounds going all weird on me. I don't know what I did to fix
> it but it seemed to fix when I pressed the "assign" button while
> powering on the AN1x.
Arthur,
Holding the Assign button while powering on the AN1x is used to switch between Mode 1
and Mode 2 - which is Yamahaspeak for alternating between Control Change Modes (see
page 9 of the AN1x Data List for the specifics.) This is very useful to to extend the range of
parameters (CC #'s) the AN1x will respond to and transmit, but I find it difficult to accept
this alone would clear the issue you've experienced.
Don't get me wrong - I'm glad your AN1x is behaving as expected, but I think it more
likely this indicates the problem is intermittent. And you did mention that the problem had
cleared at least once, temporarily, following a factory reset, correct?
> If my synth starts behaving badly again then I will try the all the
> instruction that members have told me to do to try and fix it.
Good idea - the only thing I would add is to consider a battery replacement too.
Regards,
Jon