--- In
AN1x-list@yahoogroups.com, "gwynforevans" <gwynforevans@...> wrote:
>
> Hi Jeff: thanks for your comprehensive reply.
>
> I worked around this, as mentioned in both mine and your other emails
> yesterday, but I wanted to comment that I do not have the option in
> Utility Setup Device or Ctrl No to select "Scene Ctrl". Only
> "SceneSel" is available in both menus in the relevant place, it being
> number 3 in the list of 90-something controls. Number 4 is blank, as
> are several others in the list.
To copy Scenes between Voices:
1. Hold [SCENE 1] (or [SCENE 2] and enter the number of the voice whose Scene data you
want to copy. The selected voice number flashes in the LCD.
2. Press [YES/ENTER] to execute the Scene Load operation, or [NO] to cancel it.
To use this function correctly, keep in mind you are initiating the copy from the
destination Voice/Scene and choosing the Source Voice/Scene. Make sense? This does
_not_ work ∗if∗ you want to copy Scene2 from a Voice to Scene1 of another Voice. You will
need to Swap Scenes in the source Voice beforehand:
Scene Swap Function
1. Hold [STORE] and press both [SCENE 1] and [SCENE 2] switches. "SURE?[Y/N]" flashes in
the LCD
2. Press [YES/ENTER] to execute the Scene Swap operation, or [NO] to cancel it.
∗Make certain to Store the resulting Voice before resuming with your Scene Copy.
> It may be my OS version or something (it displaying "TEST MODE V 1.02"
> when I start up and hold down 0 + and - together.
No, it works the same under v1.02 as the other release levels.
> Secondly, the copying of the scene did not work even when I followed
> to method you suggest below! I ∗can∗ swap, and I ∗can∗ copy from
> other voices, I just cannot copy scene 1 to scene 2.
See above explanation - you cannot copy Scene 1 to Scene 2 or Scene 2 to Scene 1 of
individual Voices unless you perform a Scene Swap in the source Voice beforehand - and
Store the results - prior to the Scene copy.
I think you had a question regarding Scene Morph too, which I think you've resolved by
now, but for the record:
> My question is this: I want to morph between the two bass sounds, and when I set
either the modulation wheel or one of the assignable Knobs to SceneSel, it just alternates
between the scenes, without morphing between them.
This is correct if you want to use SceneSel, but not to Morph between Scenes in a Voice.
Try the following instead:
1. From UTILIT/SETUP menu, choose Ctrl Device - set MW to 1: Mod Dpt using the Ctrl No
button to select from the available MIDI CC numbers.
2. Now scroll the available choices in Ctrl Device until you reach SCENE - set SCENE to 1:
Mod Dpt using the Ctrl No button to select from the available MIDI CC numbers.
3. Pressing both [SCENE] switches simultaneously activates the Scene Control function,
which lets you "morph", or cross-fade between Scenes in real-time using the assignable
[MODULATION] wheel, an assignable Foot Controller, or any other continuous controller.
If you want to use a controller other than the Mod Wheel to Morph, the repeat step 2 and
change SCENE using the Ctrl No button to select from the available MID CC Numbers
Regards,
Jon