> From: joel <mango@...>
>
> I have connected my PC's midi-out to my an1x's midi-in, PC's midi-in to
> an1x's midi-out, an1x's midi-through to tr-707's midi-in.
> Then set the tr-707's midichannel to 10, then set the an1x's Tx
> (transmit?) Ch(annel)
> to 10 also, and then the an1x's Rx (receive?) Ch(annel) to 10 also, then
> i set Local off on my an1x so i could be sure i could hear the
> drummachine. (if i use the 707's own sequencer there is sound coming
> out, so it's not the volume settings i have overlooked ;)
Nope, if something comes from the PC's MIDI out, you'll hear both
your AN1x and your 707. Set the AN1x to different receive channals
(for both scenes) than the 707.
> Then i set the tr-707 to OMNI off and the 707's sync-mode to slave.
> The 707 should now respond to the two octaves below C from my an1x,
> but it doesn't work.
> What am i doing wrong?
You probably don't have the PC echo MIDI signals from its in to
its out.
Try connecting the MIDI out of the AN1x to the MIDI in of the 707.
If you still don't hear anything, you have a problem.
- Peter