Jimmy & Jeff,
If I know Jimmy by now, he's all atwitchin' since you talked about
internal organs. But not to worry, Jim me mon... it is a simple fix for
a tech, should run under $100 at the most. The costs will be due to
having bench time to get to the offending pot (the tech name for the
control under the knob) and possibly sourcing an identical replacement.
IIRC someone on the list said that they had found the correct part from
a major supplier like Digi-Key or Mouser. Any help? If Jimmy could buy
the part first, he might save markup money when he puts it in the shop.
∗Ed Edwards∗
><> <>< <>< ><>
http://www.ezekielswheel.comhttp://www.untiedmusic.com/ezekielhttp://mysite.verizon.net/vze29bq6 Jeff wrote:
> spaceanimals a écrit :
>
>
>> One of the knobs on my AN1X is loose. Tap it and the numbers jump all
>> over. Is there any easy fix?
>>
>> Jimmy
>>
>>
>>
>>
>>
> Hi Jimmy !
> Looks like a bad contact .... or less likely a worn out pot.
> Try to clean it (inside) with an electric contact cleaner, turn it up
> and down when you spray the cleaner inside, wipe out the excess liquid
> and check if your troubles are over . If not, you have to change the pot
> for a new one....(same ohmic value - same shaft type) or at least the
> solder joints on each of the 3 lugs of the existing pot.
> With a good soldering iron with a fine tip, not an ice axe, please, and
> electronic grade solder!
> Cheers
> J.F.
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
> The AN1x Control Synthesizer FAQ::
> http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>
> Yahoo! Groups Links
>
>
>
>
>