--- In
AN1x-list@yahoogroups.com, jesse meyer <erroneusnickname9876@...> wrote:
>
> A new update with my issues. I tried out the AN1x
> logic environment(I'm in osx and can't use the
> an1xedit.)
If you have Panther, or Tiger, on your PowerPC Mac - and you run Classic - then you can
run AN1xEdit w/ OMS alongside a USB MIDI Interface that has an OMS USB MIDI Driver
under Classic and it works perfectly well.
> When I change from Scene 1 to Scene 2 in
> logic, nothing changes on the AN1x, but if I select
> Scene 1+2, the modulation wheel now morphs between the
> 2 scenes. The buttons still don't respond, and the
> lights are still out, but at least the morph is
> working. Since the buttons don't respond, I still
> can't save scenes, but it makes me think it's at least
> a little less broken.
>
> Any idea why switching from Scene 1 to 2 doesn't
> change the sound but activating Scene 1+2 does?
>
That makes no sense because Scene Select is simply sending the AN1x MIDI CC #003
while the AN1x is in Mode 2. I assume you're using AN1x Env.lso? The Scene Select from 1
-> 2 is simply sending the AN1x a MIDI CC of #003 with a value greater than '42' and
from 2 -> 1+2 is MIDI CC #003 with a value greater than '85'.
Have you tried to tweak Voice when select Scene 2 from the Logic environment? You
should be able to distinguish a difference from Scene 1.
Jon